Model NO.: YB-100
Benefit & Features
YB Series Self-Priming Rotary Vane Pump is with by-pass valve built-in.The pump uses a Rotor with sliding vanes to drive the liquid transferring.
The material of construction is Nodular Cast Iron with Self-Lubricating Vanes.
Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps.
The Pump has its obvious advantage in the transmission of high flow at low revolution.
Flow Rate
Model No. SIze Speed at 650 Per RPM the Flow Rate peed at 650 Per RPM the Flow Rate
YB-50 50mm 2" 56G/Min or 210L/Min 40G/Min or 150L/Min
YB-65 65mm 2.5" 103G/Mim or 390L/Min 82G/Min or 310L/Min
YB-80 80mm 3" 200G/Min or 760L/Min 160G/Min or 600L/Min
YB-100 100mm 4" 505G/Min or 1900L/Min 405G/Min or 1530L/Min

Application
Road Fuel Tanker Truck
Fleet Refueling
Lube Oil
Aviation Refuelers
Transmission of pertrochemicals, Gasolines, Diesel, Biofuel, Solvent, etc.

Installation
With Cardan staff or hydraulic motor, the pump can be installed on oil tank trucks.And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispenser and floating fuel equipment which are compose of pumps and flowmeters. Equiped with Teflon seals, the pump can als transfer a wide variety of solvent in the pertrochemicals indurty.

Others:
Only Pump is Available
Pump can be made at Diesel Engine Drive, V-Belt Drive, Coupling Drive.
 

As the key equipment of Heat Exchanger production, the fin forming machine matched with different specification's molds can automatically and stably produce all kinds of Aluminum Fins , Copper Fins  and SS Fins . The fins via our Fin Forming Machine have many advantages of high precision, good appearance and low processing cost. Fin production machine mainly includes automatic  uncoiler, high speed forming fins machine,  fin molds, automatic cutting-off fins Device.

Better-Tech customizes high quality aluminum/copper/stainless steel fin forming molds for all kinds of fins including offset fin, straight fin, perforated fin, louvered fin, corrugated fin. Our fin engineers are very professional with nearly 20 years` experience in fin forming machine & Fin Tooling Molds that can meet your completed demands. Welcome your inquiry.




Heat Exchanger Fin Machine

Fin Forming Machine, Heat Exchanger Fin Mould, Turbulator Fin Tooling Dies, Radiator Fin Production Machines, Servo Cutting Fin Machine

Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com

April 20, 2020