Centrifuge daily maintenance precautions

The speed at which the centrifuge rotates at work is very fast, because it requires a powerful centrifugal force generated by the rotation, which changes the settling velocity of the substance and separates the different substances in the sample. In order to ensure that the centrifuge can always maintain normal operation under high-speed rotation, daily maintenance and maintenance of the centrifuge are required. How to perform routine maintenance on the centrifuge?

When we can do a check on the centrifuge before use, if we want to see if the centrifuge's brakes are not working, we can turn off the power and manually turn the drum so that the centrifuge can be checked out. The brakes are not a problem. Of course, we also need to check whether some other parts have worn or loose screws. If problems are found, we should repair and replace them in time.

In order to ensure that the centrifuge can work normally, we need to perform semi-annual maintenance on some rotating bearings inside the centrifuge. The main task is to refuel these places and check the running conditions of these bearing locations. Is there any situation of wear and tear? Refueling the bearing part can ensure the normal rotation of the bearing, and it will not run out of jam due to no oil. And for those worn parts, we must timely repair according to the degree of wear, if serious, we need to replace it in time.

In the usual use process, we must strictly follow the operating procedures to wake up the operation. If it is a new machine, we can let the centrifuge do a few hours of idling after we buy it back to ensure that there are no problems and then put it into use.