Titanium parts is a metal that is widely used in industry. It has excellent strength and light weight, so it is often used in the manufacture of aviation, spaceflight and medical equipment. But in order to produce high-quality titanium parts, SCZY company uses precision machining technology.
SCZY has been machining of titanium alloy parts more than 10 years, and we have a relatively comprehensive grasp of material properties and machining technology. Our precision machined titanium parts have been exported to Sri Lanka, Germany, Italy and other countries for a long time.
CNC Machining Titanium,Machining of Titanium,Precision Machining Titanium Parts, Machined Titanium Parts,CNC Titanium Parts Shenzhen SCZY Technology Co.,Ltd , https://www.sczymachining.com
The company has won multi-level scientific research awards and invention patents, and its product quality requirements are high. Prior to this, the electrical systems used in its food machinery mainly used imported equipment. However, the use of imported electrical systems, but also exposed a lot of problems, the specific performance of the supplier's pre-sales technical support and after-sales service can not keep up, seriously affecting the speed of the food machinery company's research and development of new products and service reputation.
Delta reached out in the crisis to help the food machinery company save its reputation. After in-depth study of the company's food machinery, Delta assisted in the development of UHT tubular ultra-high temperature sterilization machine, widely used in liquid food "sterile" and "non-sterile" heat treatment of the fully automatic system, the product has a wide range of viscosity, And can adapt to fibers and particles.
The electrical part of this tube sterilizer adopts the cost-effective Delta mechanical and electrical products, which makes the machine have high control precision and can accurately control the water temperature. The inside of the machine is built by the control components of international famous brands, including Delta PLC and man-machine interface, steam pressure reducing valve, regulating valve, diverter valve, pressure regulator valve, material pump and hot water pump.
Because Delta's EH series of high-performance PLCs are small in size, fast in speed, very powerful, and have a wealth of modules and boards, they are extremely suitable for the detection, monitoring and automatic control of such sterilizers.
Of course, good machines often have excellent human-machine interfaces. The Delta man-machine function installed on the sterilizer displays the current temperature heating curve and the historical trend curve, and records the current temperature data. If the current temperature exceeds the set value of the limit temperature, the system will prompt an alarm message and be safe. It is the perfect function of Delta's control products that makes this sterilizer perform well.
During the sterilization process, the food flow enters from the balance pump and is preheated to a homogenization temperature of about 90 to 95 ° C. After stabilization, it is then subjected to ultra-high temperature sterilization and finally cooled to the filling temperature. The system uses hot water and sterilization in the circulation loop to save energy and adhere to Delta's corporate philosophy of “environmental protection, energy saving and automationâ€. The machine has excellent sterilization performance, the production capacity is 1~30t/h, the typical sterilization temperature is 90~140°C; and it can be connected to any control system and can be mounted on the chassis.
Delta PLC can control according to the opening degree of the proportional valve. By subdividing the set temperature into segments, the actual opening temperature is sampled and the set temperature is compared to the actual temperature. After the difference between the two is obtained, the difference is subdivided in a certain range, and the opening degree of the proportional valve is controlled to different degrees in different regions. The stepping debugging is simple and the effect is quite good, thus ensuring the accuracy of the temperature control.
With its vision of environmental protection and energy conservation, Delta Group is working hard to improve advanced machinery and equipment, and promote the adoption of new technologies in the food machinery manufacturing industry to improve product quality and continuously develop new products, thereby opening up a larger market.
Precision machining titanium parts are often processed by CNC machining, which can achieve high-precision processing requirements. In addition, the surface of precision titanium parts often requires polishing and surface treatment to increase corrosion resistance and ensure the quality of titanium parts
SCZY company also needs to take certain safety measures when machined titanium parts, because titanium parts are easy to melt. For this reason, low-temperature cooling is generally selected to reduce the chance of thermal damage to the clamp, tool and machine tool. In addition to the above technologies, it may also be necessary to match cutting tools with a lower melting point in order to avoid quality problems with titanium parts.
In general, precision machining titanium parts is a difficult task, but its reliability and durability are outstanding, and it is suitable for the manufacture of various high-performance consumer products such as aerospace and medical equipment.
With the development of the world economy, China's machinery manufacturing industry has made great progress. The fast-growing food processing industry has brought business opportunities to the food machinery manufacturing industry. Shanghai Food Machinery Co., Ltd. seized this opportunity to integrate scientific research, production and service, and has now grown into a backbone force in the national food machinery industry.
September 22, 2023