Double Layer Color Steel Tiles Roll Forming Machine for Corrugated and Dovetail Panels

We are the professional color steel sheet cold roll forming machine manufacturer in China. 

Roll Forming Machine is made of feeding section, forming section and punching & cutting section, the finished profiles are flat and beautiful and high strength and durable. The finished profiles are widely used in construction sites, workshop, warehouses and so on. 

Our machine features high durability and good appearance. Welcome to inquiry our machines, we will offer the lower price and better delivery time. 



Description of Technical Parameters, as follows: 

 

Upper Layer: Color Steel Corrugation Tile
Down Layer: Color Steel Roofing/Wall Tile

Manual Un-coiler:
 Max Capacity: 5000kgs.
 Inner diameter of coil: 400-600mm.
 Manual with brake.

Leveler Device:
 Ensure the material level and straight.
 The width can be adjusted.

Main Forming System:
 Max feeding width: 1000 - 1250 mm.
 Product max. effective width: 640 - 1120 mm.
 Thickness of sheet:  0.1-1.0 mm.
 Material: GI sheet coil or Colored sheet coil etc.
 Motor Power: 5.5 kw forming system.
 Roller material: C45 steel.
 Diameter of shaft: Upper level: 80 mm; Down level: 95 mm.
 Forming station: Upper level: 12 rows; Down level: 14 rows. 
 Surface of Roller: Chrome plating, Heat Treatment. 
 Transmission: by chain and gear.
 Base Frame: 350 H steel welded. 
 Machine Body: Electrostatic Spraying Treatment.
 Machine base is assembled & welded by high quality steel.
 Forming Speed: Upper level: 3m/min;Down level: 0-20m/min.

Hydraulic Cutting System:
 Cutting way: pause to cut.
 Oil pump station  1set.
 Hydraulic power: 4 kw hydraulic system.
 Hydraulic Station Structure: 300mm steel welded. Four guide columns.
 Blade Material: CR12mov with heat treatment HRC60-62.
 Cutting mould: 2 sets.
 Forced air cooling device available.

Electrical System (PLC&HMI Control System):
 Control system: HMI & PLC control panel.                                                             
PLC and HMI touch Screen (Taiwan Delta)
 Automatic length measurement.
 Automatic quantity measurement.
 Length measurement: Rotary Encoder.
 Over current protection for control system, aviation plugs.
 Power: 380V 50Hz 3Phase (as per local requirement)

Run-Out Table:
 Frame: 8# steel groove welded.
 Roller type.
 Quantity: 1 pc.
(They can be modified according to customer requirements)




Service Commitment & Quality Assurance

Installation: If necessary, engineer is available to service machinery overseas; but all the relevant cost and extra 100USD/day for our engineer will be paid by the buyer. 

Warranty: 2 years since the machine leave seller's factory. 
During the warranty period, it covers all spare parts of machines, if you find some spare parts were damaged, those new spare parts will be supplied free by us, but normal wear and tear excepted. And the freight should be bore equally by both parties. 

We will provide the technical support for the whole life of the equipment. 

Our Main Machines: 

Color Steel Tile Roll Forming Machine	Large-Span No-Girder Roll Forming Machine
Glazed Color Steel Tile Roll Forming MachineÂ	Large-Span Curve Forming Machine
Double Layer Color Steel Tile Roll Forming Machine	Roller Shutter Door Machine
Rock Wool And EPS Sandwich Panel Forming Machine	Door Profile MachineÂ
C/Z/U/T Purlin Roll Forming Machine	4m - 6m Hydraulic Bending Machine & Shearing MachineÂ
Light Steel Keel Roll Forming Machine	Auto Crimping Curved Roll Forming Machine
Color Steel Roof Ridge Cap Roll Forming Machine	Tooth Shape Corrugated Sheet Bending Machine
Steel Floor Deck Panel Roll Forming Machine	Hydraulic Full-Automatic De-coiler and Coil Car
Wind-Proof And Dust Shield Board Roll Forming Machine	Metal Sheet Foot Pedal Shear Machine
Highway Guard Rail Sheet Roll Forming Machine	Flattening Machine
Car Carriage Plate Roll Forming Machine	Simple & Heavy Slitting Machine
Environmental Anode Steel Plate Roll Forming Machine	New Type Cement Fiber Tile Forming MachineÂ

If you have any questions, please let me know them, I will reply you in 24 hours and offer the optimum solution to you. 

Please send me your email, and then I will send you Full Selection Machine Catalogues with all parameters of machines and products!

And I can send the Videos of Roll Forming Machines to you, so that you can directly see our machines!!!

WELCOME TO VISIT OUR COMPANY AT ANY TIME!!!!!

Stainless Steel Cut Wire Shot AS Cut

Cut Wire Shot is a very important and popular Metal Abrasive.It is often utilized in shot peening processes when ferrous contamination of work piece is forbidden. As the most cost-effective one, the stainlesss steel cut wire shot, also named Stainless Steel Shot, is widely used for shot peening processes on stainless steel or inconel parts. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire Shot As Conditioned is usually used for shot peening processes on stainless steel or inconel parts. As for Longlived stainless steel cut wire shot, the minimum diameter could be 0.15mm and maximum diameter is 3mm. If you want, it could be bigger as your demand.

Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey stainless steel shot.

Generally, stainless steel cut wire shot could be classfied into two kinds. One is stainless steel cut wire shot as cut and as conditioned. And then, stainless steel cut wire shot as conditioned could also be divided into three small groups according to their different roundness and they are G1, g2, G3.

Stainless Steel Cut Wire Shot As Cut,410 Stainless Steel Cut Wire Shot As Cut,,Sus410 Stainless Steel Cut Wire Shot As Cut

Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com