Downstream type permanent magnetic cylinder magnetic separator The direction of the ore is consistent with the direction of rotation of the cylinder or the direction of movement of the magnetic product. The slurry is directly fed to the cylinder 1 under the magnetic system of the cylinder 1, and the non-magnetic ore and the magnetically weak ore are two below the cylinder. The gap between the bottom plates is discharged, and the magnetic ore particles are sucked onto the surface of the cylinder, and are rotated with the cylinder to a weak magnetic field at the edge of the magnetic system, and are discharged into the concentrate tank by the unloading water pipe. The downstream magnetic separator has a large processing capacity and is suitable for roughing and selecting rough magnetic materials (greater than 6 mm), or for recovering magnetic heavy media, and can also be used in multiple series. However, the selection index of this magnetic separator is highly influenced by the amount of ore given and is responsive. When the amount of minerals is large, the magnetic ore particles are easily lost to the tailings. Therefore, it is necessary to strengthen the operation and control the lower level of the slurry.
The Shenxi Parapet Wall anchor was designed to be used on flat roofs that are surrounded by a parapet wall.
On buildings with parapets, the parapet clampis the ideal solution, as it is not only easy to install, saves labor costs, but also has no roof space restrictions on the installation of standard suspension mechanism with counter weights, very popular in Singapore, Chile and Peru market.
Roof Mechanism of Suspended Platform mainly has two types: Suspension mechanism and Parapet wall anchor.
1. Suspension Mechanism
Suspension mechanism is installed on the top of the building and it is easy to install. The height and the overhang of the job can be adjusted to adapt to different kinds of building facades and roof structures. Projecting length ranges from 1.3m to 1.7m. The suspension mechanism can be designed and made according to specific conditions that customers may need.
2. Parapet Wall Anchor
Parapet clamper (a kind of suspension mechanism) is suited for constructions with parapet wall of sufficient strength and adequate height. It is consisted with front base, rear base, clamping unit and so on. Working wire rope and safety wire rope are fixed to the rear base, and hung through the suspension ends of the front bases. As installation, put the suspension mechanism across the parapet wall, and adapt the rear base to the wall of certain thickness. (Notice: before using of such suspension mechanism, you must check whether the strength of parapet wall can afford the load distributed on it by the suspension mechanism.)
Suspension Mechanism,Galvanized Suspension Mechanism,Painted Suspension Mechanism,Moveable Suspension Mechanism Shenxi Machinery , https://www.cn-shenxi.com
Parapet Clamp VS Suspension Mechanism:
May 11, 2023