Description Of Goods:
Model:FTech-ISO9073(III)
Applicable Range
Used for testing the mechanical performance strength of tensile, tearing, rapture,specified elongation, constant load, flexibility, seam slippage resistance peeling and also widely used for testing the strength of tensile, compression kink,adhesion,peeling,tearing,rapture, creeping of rubber, plastic, leather, metal, wire, paper, packaging, building materials, petrochemical, electrical and geotechnical materials.
Relevant Standards
Universal testing machine used in textile testing standard sample
 Standard
 description
 ISO13934.1
 Stretch fabric strip method
 ISO13934.2
 Stretch fabric catch sampling method
ISO13937.2
 Textile Trouser (single slit) tear
ISO9073.4
 Textile trapezoid tear
ISO13936.1
 Method set slip yarn woven fabric at the seams anti-slip
ISO13936.2
 Fixed load method of yarn woven fabric seams at theanti-slip
ISO13935.1
 Strong seams strip method
ISO13935.2
 Joints strong grasp sampling method
 ASTM D5034
 Stretch fabric catch sampling method
 ASTM D5035
 Stretch fabric strip method
 ASTM D2261
 Single tongue tear strength fabric
 ASTM D5587
 Trapezoidal tear strength fabric
 ASTM D4964
 Flexibility test
 ASTM D3936
 Peel strength
 ASTM D1683(Substitute 434)
 Joint anti-slip
 JIS L1096
 Fabric tensile, tear test
Note: This list is part of the representation of the standard, which some features requirespecific gripper and sensors based on the actual choice to support the implementation of
Instrument features:
Rack design life of more than 30 years
1,Rigid high-strength materials, solid frame
Pre-loaded bearings and precision ball screw, thick beams and base beams, and lowerdegree of belt tension, can minimize the energy stored during the test, resulting in bettertest performance and to obtain more accurate modulus and strain values.
2,Excellent precision of the rail and bending
In the implementation of the axial test, only with a stable, precise rigid rail system to getaccurate results of stress and strain to ensure that the sample under load by the lateral force of the impact to a minimum.
3,Greater imports of motor drive system and advanced servo control and higher reliability.
Beginning of the test motor to power the acceleration rate is higher, the operation cycle ofthe test cycle faster, dual-belt system to keep pace with ball screw movement, andorientation and help to eliminate the beam tilt in the system and precise positioning.
The seventh generation of embedded systems based on digital signal processing (DSP) control technology
1,High-speed, low vibration Japanese imports AC servo drives, high-resolution digital closed-loop controller.
2,Modular design, multi-channel data acquisition and analog output module, open data management, enabling the load, deformation, displacement, speed and othermeasurement and control.
3,Imported high-precision load cell precision 24 bits A / D, sampling frequency of2000Hz, maximum resolution power of the whole 1 / 1, 00,000.
4,With a mobile control box, easy to move or be rack-mounted, display machine working status, and provide the necessary test control process controls, positioning precision positioning to move the button and thumb wheel that can efficiently move the traffic, fine-tuning can be accurate to 0.1 mm.
Powerful, easy to use control software (software copyright 2010SR046285)
1,The use of component-based software system architecture, testing process free combination, meet all the conventional test method, test methods and increasing thestandard library (GB / T, FZ / T, ISO, ASTM, BS, etc.).
2,Guide the tester to complete the relevant standard test, the user can not reset the case of existing hardware and software system updates, users can use online support, easymaintenance of equipment, never worry about.
3,User-friendly operating software with intuitive operation, the button operation and easy to understand the environment greatly simplifies the test selection screen, start-up andreal-time monitoring. The display is easy to understand and highly flexible, interactive datagraphics rendering, enhanced test analysis.
4,Document class report and charts, or data sharing to meet your particular needs andcustomized formats. The format will be easy to create effective output for the test results oftest reports and other visual formats, such as Excel, Word, HTML, etc.
,A full set of optional clamps, accessories and extensometer
Technical parameters:
1,Test method: according to the international choice of constant elongation (CRE)principle
2,Measuring system: imported high-precision force sensor
3,Force measurement range: 1% of full scale to 100%
Full scale:10000N
4,Minimum scale value: 0.1N
5,Force measurement accuracy: ≤ ± 0.2% F · S
6,Clamping distance: limit block control, digital setting
7,Clamping range adjustment accuracy: ± 0.1mm
8,Speed control system: AC servo speed control system imported from Japan
9,Tensile speed :0.001-1000mm / min digital speed, error ≤ ± 2%
10,Instruments stroke: 800mm (beam)
11,Gantry width: 420mm
12,Elongation Resolution: 0.001mm
13,Sample holder: manual clamping, pneumatic clamping
14,Sampling frequency: 2000 times / sec.
15,Power supply: AC220V ± 10% 50Hz 1KW
16,Dimensions: 900 × 780 × 1750mm (host L × W × H)
17,Weight: 100kg (standard)
Â
Model NO.: FTech-ISO9073(III)
Standard: ISO9073
Trademark: TESTECH
Transport Package: Plywood Packing
Origin: China
September 15, 2018