Model NO.: M7N, AKA M74, M74D
Type: HUU803
Balance: Unbalanced
Trademark: Yalan
Transport Package: Carton
Specification: Inner Diameter: 18 mm to 200 mm
Origin: China
HS Code: 8484200090
M7N, AKA M74, M74D Mechanical Seal for Chemical Centrifugal Pumps, KSB/Kaiquan Water Pumps, Vacuum Pumps, Axially Split Pumps, Blowers and Paper-making Machines

Structural Features: single end, small spring, unbalanced, independent direction of rotation, drive sleeve transmission. This component can work as an alternative to similar original seal components of KSB and Kaiquan water pumps.

Standards: DIN24960, ISO3069, and GB6556-94

Scopes of Application: mainly used in chemical centrifugal pumps, vacuum pumps, axially split pumps, blowers, compressors and paper-making equipment for chemical processing, oil refining, petrochemical engineering, sewage treatment, pesticide and chemical fertilizer production.

Operation Parameters: 
Pressure: 1.6 MPa or less
Temperature: - 20 ~ 180 ºC
Linear Speed: 20 m/s or less

Mediums: oil, water, acid, alkali, organic solvents and mediums that are easy to be crystallized or have granules and high viscosity.

Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.
M7N, AKA M74, M74D Mechanical Seal for Chemical Centrifugal Pumps, KSB/Kaiquan Water Pumps, Vacuum Pumps, Axially Split Pumps, Blowers and Paper-making Machines
M7N, AKA M74, M74D Mechanical Seal for Chemical Centrifugal Pumps, KSB/Kaiquan Water Pumps, Vacuum Pumps, Axially Split Pumps, Blowers and Paper-making Machines
M7N, AKA M74, M74D Mechanical Seal for Chemical Centrifugal Pumps, KSB/Kaiquan Water Pumps, Vacuum Pumps, Axially Split Pumps, Blowers and Paper-making Machines

M7N, AKA M74, M74D Mechanical Seal for Chemical Centrifugal Pumps, KSB/Kaiquan Water Pumps, Vacuum Pumps, Axially Split Pumps, Blowers and Paper-making Machines
 

Aeration System

Roof ventilation valves and exhaust fans :

For the exit of warm and humid air caused by the aeration fans, roof ventilation are designed. The design of these ventilation systems are in a way to prevent outside objects to enter inside the Silo, designed on the ceiling for better ventilation.

Centrifugal Fan :
To prevent damage to the grain caused by the increase in temperature and humidity, ventilation is required. This operation is done by the aeration fan mounted at the bottom of the silo. The body of the aeration fans are made of high quality galvanized steel sheets with a long life and very resistant to corrosion. All parts of the body are connected to each other by nuts and bolts. Exhaust air flow rate and pressure and electric power technology is calculated based on the capacity, height and type of grain stored in the silo.

Vents:
roof vents are designed to carry out the warm air from the silo and during this process to prevent any object to enter inside the silo.

Aeration System

Silo Aeration System, Sweep Auger, Silo Exhaust Fans, Silo Ventilation System

Shijiazhuang Goldrain I/E Co.,Ltd. , https://www.goldraingroup.com

January 09, 2021