GR (SHANDONG) NEW MATERIAL CO., LTD , https://www.grmaterial-film.com
Oil drum heater use method
Move the product to the desired place, open the two fasteners of the heater, place the heated oil barrel on the chassis heater and the barrel heater, and then fasten the barrel buckle to connect the power cable. Under the switch box of the protection device (in the two parts of the bucket body and the chassis) and the ground wire of the heater, the set temperature of the temperature controller is adjusted to the required temperature value, the time is adjusted to the required set time, and the heating is started. jobs. (At this time, the temperature in the barrel is lower than the set temperature, the green light in the meter is on, the green light is off when the desired temperature is reached, the red light is on the watch and there is a temperature display, at this time, the time counter starts counting but reaches the set time At the time, the heater stopped working.)
Oil drum heater considerations
1. The heater should be effectively grounded to ensure personal safety.
2. Select the appropriate power supply based on the heater's power.
3. The heater should pay attention to the influence of moisture and other harmful corrosive gases, and does not collide with other objects.
4. The bottom of the heated drum should be in contact with the chassis heater.
The 200-liter oil drum is a standard container commonly used in the factory. Such as the loading of fat, asphalt, heavy oil, paint, wax products, petrolatum and other low freezing point fluids, suction emissions are difficult. It is particularly prominent when the climate is cold, and this heater solves this type of technical problem. After being energized, the inner wall and the bottom generate heat evenly to melt the fluid in the barrel or reduce the viscosity so that the fluid can be smoothly discharged or pumped out.
Oil drum heater features
1, easy to operate: at the bottom with universal wheel movement, can be moved directly to the scene, the drum around the heating.
2, the use of safety: This product is equipped with temperature control switch, control the inner wall temperature, when used to choose to adjust the constant temperature. Avoid overheating and cause accidents.
3, high thermal efficiency: the internal evenly equipped with electric heating plate, and insulation, the top with a round cover, effectively reducing the heat loss.
4. Cleanliness: Because it is not an electric heating rod, a steam tube, a plug-in heating method and an external heating method, contamination of objects in the barrel is avoided.
download Google
If the user has special requirements, or other technical issues can be negotiated with the factory, such as the power to change the three-phase power.
May 13, 2023