We have a wide range of products under this category. In addition to car products, we also have boat covers. Car Interior Accessories;accessories of car interior;accessories for car interior;Cargo Trunk Liners;alto car interior accessories;Car Steering Wheel&Accessories;Car Floor Mats Liners; Ningbo Autrends International Trade Co.,Ltd. , https://www.nbcoverfabric.com
Production description:
1
This machine is applicable to  the steel tube and pipe products to deal with internal and externalÂ
surface, remove the oxide welding slag, and other miscellaneous items, showing a metallic luster.
2
After shot blasting, it can improve paint film adhesion with steel, improve anti-rust capacity, improve the quality and prolong the service life of steel structure.
3
The steel shots blasted by blasting turbines will be collected, purifying by shots circle system andÂ
continue to be used again for blasting turbines.
4
The working process flow of shots circle system: steel shots blasted by blasting turbines will beÂ
collected by portrait screw conveyor and delivered to bucket elevator then the bucket elevator willÂ
lift to air wash type separator.
5
After separating, the dust and broken steel shots will be removed away from steel shots and goodÂ
steel shots will enter storage bin.
6
Eliminate inner stress, enhance workpiece's fatigue resistance, to improve the anti-fatigue properties of the workpiece.
Use: This series cleaning machine (QGW) is applicable to various diameters steel tube suface cleaning, widely used in petrochemical engineering, steel, district heating, water and so on.
Advantage:
-Â For cleaning the outer wall of steel pipes and tubes.
-Â Floor mounted "BE" air wash separator for ease of observation and maintenance.
-Â The blast compartment and floor are consist of manganese plating to ensure longevity.
-Â Fully automatic design to provide high volume production and cost effective performance.
Specification of Steel pipe shot blasting machine:
Type
Cleaning size (mm)
Cleaning speed (m/min)
Purpose
QGW100
50-300
2-10
Outer wall of shot blasting machine
QGW720
159-720
2-6
QGW1200
219-1016
1-6
QGW1500
325-1600
1-6
QGW2800
1016-2800
1-2
QGN100
50-300
1-4
Inner wall of shot blasting machine
QGN700
325-720
1-2
QGN1000
720-1016
1-4
QGN1500
1016-1500
1-4
Structural characteristice
This machine is a special reciprocating steel sand blasting machine, which consists of Blasting chamber, Blasting wheel assembly, Roller conveoyr, Abrasive recycling system (Screw conveyor, Elevator, Separator), Dust removal system, Electric control system, etc.
1. Blasting chamber
Shot blasting chamber shells adopt profile steel and steel plate welding structure, is a strong, sealing, spacious operation space for shot blasting of workpieces. Shot blasting chamber is made by room body shell, gate, wall around, lateral wall, roof after, guard board etc.
2. Blast wheel assembly
Blast wheel assembly is made up of blast wheel shell, motor, importing tube, leaf, impeller, directional set of pills, points wheel, block sand plate, guard board and other components, which leaves, guard board, etc all wear parts using 20% high-chromium cast iron.
3. Abrasive recycling system
Screw conveyor
The screw conveyor is a kind of abrasive horizontal conveying device, is an important part of the abrasive recycling system of the blasting machine.
Bucket elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
4. Dust removal system
This machine adopts Cartridge or Bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
5. Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Company capacity:
1
10 years professional production experience in shot blasting machinery industry.
2
22,000 m^2 production workshop, strong production capacity.
3
Professional senior engineer develop the best solution.
4
Strict quality control system, CE, BV, ISO9001 certificate available.
5
Main components adopt imported international famous brand.
6
Timely delivery, one hour to Qingdao port.
7
Professional after-sale service, Email will be reply in 24 hours.
8
Site installation and commissioning in your factory.
Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB, CIP, CFR, CIF, DDU, DDP.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 15-40 days according to different type machine.
After-sale service:
1. Installation and commissioning issue: We will send 1-2 technicians to assist with machine installation and commissioning, customer pays for their tickets, hotel and diet. Customer need arrange 3-4 skilled worker and prepare insallation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality with High Chrome Castings, 40Cr, ZGMn13, etc.
Notice:
According to your requirements, the most suitable machines will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece will you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. How many workpieces do you want to clean per day?
Based on this detail information, the detailed technical proposals will be sent to you for reference.
Any question pls feel free to contact with me and welcome to visit our factory!
Steel Pipe Outer Wall Shot Blast Cleaning Machine with Abrasive Recovery System
Production description:
1
This machine is applicable to  the steel tube and pipe products to deal with internal and externalÂ
surface, remove the oxide welding slag, and other miscellaneous items, showing a metallic luster.
2
After shot blasting, it can improve paint film adhesion with steel, improve anti-rust capacity, improve the quality and prolong the service life of steel structure.
3
The steel shots blasted by blasting turbines will be collected, purifying by shots circle system andÂ
continue to be used again for blasting turbines.
4
The working process flow of shots circle system: steel shots blasted by blasting turbines will beÂ
collected by portrait screw conveyor and delivered to bucket elevator then the bucket elevator willÂ
lift to air wash type separator.
5
After separating, the dust and broken steel shots will be removed away from steel shots and goodÂ
steel shots will enter storage bin.
6
Eliminate inner stress, enhance workpiece's fatigue resistance, to improve the anti-fatigue properties of the workpiece.
Use: This series cleaning machine (QGW) is applicable to various diameters steel tube suface cleaning, widely used in petrochemical engineering, steel, district heating, water and so on.
Advantage:
-Â For cleaning the outer wall of steel pipes and tubes.
-Â Floor mounted "BE" air wash separator for ease of observation and maintenance.
-Â The blast compartment and floor are consist of manganese plating to ensure longevity.
-Â Fully automatic design to provide high volume production and cost effective performance.
Specification of Steel pipe shot blasting machine:
Type
Cleaning size (mm)
Cleaning speed (m/min)
Purpose
QGW100
50-300
2-10
Outer wall of shot blasting machine
QGW720
159-720
2-6
QGW1200
219-1016
1-6
QGW1500
325-1600
1-6
QGW2800
1016-2800
1-2
QGN100
50-300
1-4
Inner wall of shot blasting machine
QGN700
325-720
1-2
QGN1000
720-1016
1-4
QGN1500
1016-1500
1-4
Structural characteristice
This machine is a special reciprocating steel sand blasting machine, which consists of Blasting chamber, Blasting wheel assembly, Roller conveoyr, Abrasive recycling system (Screw conveyor, Elevator, Separator), Dust removal system, Electric control system, etc.
1. Blasting chamber
Shot blasting chamber shells adopt profile steel and steel plate welding structure, is a strong, sealing, spacious operation space for shot blasting of workpieces. Shot blasting chamber is made by room body shell, gate, wall around, lateral wall, roof after, guard board etc.
2. Blast wheel assembly
Blast wheel assembly is made up of blast wheel shell, motor, importing tube, leaf, impeller, directional set of pills, points wheel, block sand plate, guard board and other components, which leaves, guard board, etc all wear parts using 20% high-chromium cast iron.
3. Abrasive recycling system
Screw conveyor
The screw conveyor is a kind of abrasive horizontal conveying device, is an important part of the abrasive recycling system of the blasting machine.
Bucket elevator
The bucket elevator consists of speed reducer, upper and lower rolling barrel, transmission rubber belt, bucket elevator, enclosure and tightening device, etc.
Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of airwash area, barrel sift, conveying screw, abrasive hopper, manual abrasive controlling valve.
4. Dust removal system
This machine adopts Cartridge or Bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.
5. Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.
Company capacity:
1
10 years professional production experience in shot blasting machinery industry.
2
22,000 m^2 production workshop, strong production capacity.
3
Professional senior engineer develop the best solution.
4
Strict quality control system, CE, BV, ISO9001 certificate available.
5
Main components adopt imported international famous brand.
6
Timely delivery, one hour to Qingdao port.
7
Professional after-sale service, Email will be reply in 24 hours.
8
Site installation and commissioning in your factory.
Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB, CIP, CFR, CIF, DDU, DDP.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 15-40 days according to different type machine.
After-sale service:
1. Installation and commissioning issue: We will send 1-2 technicians to assist with machine installation and commissioning, customer pays for their tickets, hotel and diet. Customer need arrange 3-4 skilled worker and prepare insallation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our shot blasting spare parts are high quality with High Chrome Castings, 40Cr, ZGMn13, etc.
Notice:
According to your requirements, the most suitable machines will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece will you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. How many workpieces do you want to clean per day?
Based on this detail information, the detailed technical proposals will be sent to you for reference.
Any question pls feel free to contact with me and welcome to visit our factory!
And we have all kinds of Special Cover you need, and the color and material are various, of course you can also customize, we can meet all your requirements.
We have a wide range of products under this category. In addition to car products, we also have boat covers.
And we have all kinds of special cover you need, and the color and material are various, of course you can also customize, we can meet all your requirements.
Model NO.: QGW
Feature: Rust / Corrosion Proof
Condition: New
Customized: Customized
Warranty: One Year
Features: High Efficiency and Environmental Protection
Dust Collector: Needled Felt Bag or Cartridge Filter
Wear Parts: High Chrome Castings, 40cr, Zgmn13, etc.
Cleaning Process: Steel Shot, Steel Grit
Industrial Experience: Over 20 Years Experience
Advantages: Compact Structure and High Productivity
Exported Countries: USA, Russia, Australia, UAE, Mexico, etc
Electric Parts: Siemens, Omron, Chint, etc.
After-Sales Service Provided: Available to Service Machinery Overseas
Trademark: Puhua
Transport Package: Stretched Film or Nylon
Specification: CE
Origin: Shandong China (Mainland)
HS Code: 84243000
Model NO.: QGW
Feature: Rust / Corrosion Proof
Condition: New
Customized: Customized
Warranty: One Year
Features: High Efficiency and Environmental Protection
Dust Collector: Needled Felt Bag or Cartridge Filter
Wear Parts: High Chrome Castings, 40cr, Zgmn13, etc.
Cleaning Process: Steel Shot, Steel Grit
Industrial Experience: Over 20 Years Experience
Advantages: Compact Structure and High Productivity
Exported Countries: USA, Russia, Australia, UAE, Mexico, etc
Electric Parts: Siemens, Omron, Chint, etc.
After-Sales Service Provided: Available to Service Machinery Overseas
Trademark: Puhua
Transport Package: Stretched Film or Nylon
Specification: CE
Origin: Shandong China (Mainland)
HS Code: 84243000
Steel Pipe Outer Wall Shot Blast Cleaning Machine with Abrasive Recovery SystemJuly 04, 2023