Weight: 500g/PC
Trademark: Xifeng, OEM
Transport Package: Carton
Specification: 3.15cm * 1.5cm * 1.0cm
Origin: Shunde, Foshan, China
HS Code: 831130000
Tin Lead Free Solder Bar:

Our company provides Tin Lead Free Solder Bar with a variety of alloy composition , content and size of the diameter of pharmaceutical different specifications tin for customer choice. 
Pure Tin/Copper Alloy Lead Free Solder Bar Anti-Oxide Low Impurities

Tin Lead Free Solder Bar Type of Alloy:
Alloy composition (wt.%) Diameter Flux Content Weight / Roll Melting pointºC Working point Usage & Application
Type Tin-Sn Silver-Ag Copper-Cu
SAC305 96.50% 3.00% 0.50% 0.8-3.0mm 1.8-2.4% 750-1000g 217-219  280-320 LED, IT, PCB, High-class electronics, Lighting industry, Radiators, Household appliance and Precise Instruments, Audio and Sound System and other soldering
SAC300 97.00% 3.00% 0% 217-220 280-320
SAC0307 99.00% 0.30% 0.70% 217-225  260-320
SAC07 99.30% 0.00% 0.70% 227  260-280
Pure Tin/Copper Alloy Lead Free Solder Bar Anti-Oxide Low Impurities

Type of Tin Lead Free Solder Bar:
  1. Anti-oxidation tin lead free bar
  2. High temperature tin lead free bar
  3. Low temperature tin lead free bar
  4. Dim tin lead free bar
  5. Silver tin lead free bar
  6. Tin lead free solder bar for other particular applications
Size of Tin Lead Free Solder Bar:
3.15cm * 1.5cm * 1.0cm

Weight of Tin Lead Free Solder Bar:
500g/PC

Advantages of Tin Lead Free Solder Bar:
  1. Eutectic alloy.
  2. Bridge-free and icicle-free soldering.
  3. Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate.
  4. Good through-hole penetration.
  5. Good topside fillet formation.
  6. Dross rate equal or lower than tin-lead solder.
  7. Does not require a nitrogen atmosphere.
  8. Does not erode copper from holes, pads and tracks.
  9. Low rate of copper leaching makes it easy to control the copper content of the solder bath.
  10. Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys.
  11. Thermal fatigue resistance and creep strength better than tin-lead.
  12. Slow, even growth of the intermetallic layer at the solder/substrate interface.
  13. Also performs well in selective and dip soldering.
Pure Tin/Copper Alloy Lead Free Solder Bar Anti-Oxide Low Impurities

Lead time: 
We have a lot of stock of Tin Lead Free Solder Bar, if not very big quantity, we can send the goods as soon as possible after receive payment. If big quantity, 10days after order confirmed. 
 
Shipping term: 
If small quantities of tin lead solder bar, usually send by courier (DHL, FEDEX, TNT and so on).If big quantity, we are advice to ship by air or by sea. We are near Foshan, Ronggui port.

Packing:
Solder bar is packaged with carton
Neutral packing or OEM packing is available

Spectrum Analyzer:
Technical support to help customers to analyse their samples, and send out report.
Pure Tin/Copper Alloy Lead Free Solder Bar Anti-Oxide Low Impurities
 

Propylene Glycol Monomethyl Ether

Propylene Glycol Monomethyl Ether Uses (PGME or 1-methoxy-2-propanol) is an organic Solvent Raw Material with a wide variety of industrial and commercial uses.Similar to other glycol ethers, it is used as a carrier/solvent in printing/writing inks and paints/coatings. It also finds use as an industrial and commercial paint stripper. It is used as an antifreeze in diesel engines.

Pgme Solvent Sds (Propylene Glycol Monomethyl Ether), a medium-boiling glycol ether, is an active solvent for cellulose acetate butyrate, nitrocellulose, epoxy, phenolic, acrylic, and alkyd resins. It is used in a variety of coating, printing ink, and cleaning applications.

The chemical substances for this Pvc Resin product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products, and in Food Use Pesticide Products with limitations, under the Federal Insecticide, Pgme Sds Fungicide, and Rodenticide Act (FIFRA).

These glycol ethers are transported by marine, road and rail, primarily in bulk quantities, but also as packed products. Due to their flammability, they are classified as Ethylene-Vinyl Acetate hazardous Pgme Solvent Msds for transport under transport regulations. Glycol ethers should be stored at ambient temperatures away from sources of ignition and substances with oxidising or corrosive properties.

Propylene Glycol Monomethyl Ether Uses,Pgme Solvent Sds,Pgme Sds,Pgme Solvent Msds

HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaochemicals.com

March 07, 2024