We have a wide range of products under this category. In addition to car products, we also have boat covers. Auto Detailing Products,auto detailing annual income,auto detailing description Ningbo Autrends International Trade Co.,Ltd. , https://www.nbcoverfabric.com
1. Application:
This servo control Multifunction tester is controlled by X,Y,Z axes, it is suitable for the button force test, the compression for electronic products, the 3 points bending test, 4points bending test.
2. Specialties:
2.1. The tester is moved by X, Y, Z axes, X,Y are to move the testing platform, so that can realize the multi-points compression test for the buttons force test and the electronic products compression test; Z axis is connected to the transducer to apply the test force ,collect the test force and control the compression time.
2.2. The system is controlled by computer professional software, can set the test force, test time, test cycles, and test speed, and can collect the test force ,test time, test speed to generate the test graph.
2.3. X,Y,Z axes are driven by servo motor from Japanese Panasonic to drive; transmission by precise ballscrew which can achieve the low noise and long durability.
2.4. The tester is equipped with a controlled box, the operator can also use the box for the tester setting.
2.5. The tester is table top type, a special table as the accessory.
2.6.Chinese or English interface can be optional . The unit (N,Lb,gf,kgf) can be switched freely .
2.7. The testing method can be set, saved and called for use from the saving record . The data and curve can be printed directly
2.8. The life damping curve can be created, the test report can be converted to Excel and PDF file format.
3. Typical Application:
3.1. The Multi-points compression:
   3.1.1. To use the compression pads with certain diameter to compress the device, can select the places of the device need to be compressed, and after setting the test parameters and the places, to start the test, the tester will compress the selected places automatically and auto stop after finishing the set cycles for all the selected places.
        To add the side load test fixture so that can do the side load test for the connectors.
3.1.2. In the parameter setting interface, Can set the compression force , cycles, compression holding time, compression speed. During the testing, it will generate the real-time graph "force vs time", and will auto save the test data and the test graph.
 3.1 3. The test graph. The Y axis is force,(unit can be N,Lb,gf,kgf), the X axis
      is time, the unit is Second. the setting for below graph is to compress 5kg to
      keep 5 second at the 5kg force .
3.2. button force testing:
3.2.1. Automatically inductive test method: no matter what height of the key is, it can be controlled by computer automatically through the test of the Button test method.
3.2.2. Can measure the force of the buttons and also do the fatigue test, it will generate the test graph and also can generate the life damping graph.
3.3. The 3pts & 4pts bending test
The 4 points bending test is the similar as the 3 Pts bending test, the difference is the fixture. So, here, the 3 Pts bending test will be introduced. There are two ways test for the 3 Pts bending in this tester, one is 3Pts bending fatigue test, and another is the 3 Pts bending strength test.
Specification:
Model
RS-6900H
Driving method of Z axis
Servo motor of Japanese Panasonic
Transducer
50N(5kgf)1000N(100kgf)
Range of driving(up and down)
0~150mm
Test range of load
0~50N(5kgf)or 0~1000N(100kgf)
Resolution of load
0.01N
Accuracy of load
±0.5%F.S
Test range of displacement
0~150mm
Resolution of displacement
0.001mm
Accuracy of displacement
±0.03mm
Range of test speed
0.1~150mm/min
Driving method of X-Y axis
Servo motor from Panasonic
Control way
X:(right and left) Y:(forward and backward)
Driving range
X:0~300mm Y:0~300mm
Resolution of displacement
0.002mm
Accuracy of displacement
±0.05mm
Range of moving speed
5~200mm/sec
Max size of specimen
W300xD300mm
Weight
About 250kg
Size of machine
W765xD895mmxH1250mm
Size with table
W1400xD900xH1900mm
1. Application:
This servo control Multifunction tester is controlled by X,Y,Z axes, it is suitable for the button force test, the compression for electronic products, the 3 points bending test, 4points bending test.
2. Specialties:
2.1. The tester is moved by X, Y, Z axes, X,Y are to move the testing platform, so that can realize the multi-points compression test for the buttons force test and the electronic products compression test; Z axis is connected to the transducer to apply the test force ,collect the test force and control the compression time.
2.2. The system is controlled by computer professional software, can set the test force, test time, test cycles, and test speed, and can collect the test force ,test time, test speed to generate the test graph.
2.3. X,Y,Z axes are driven by servo motor from Japanese Panasonic to drive; transmission by precise ballscrew which can achieve the low noise and long durability.
2.4. The tester is equipped with a controlled box, the operator can also use the box for the tester setting.
2.5. The tester is table top type, a special table as the accessory.
2.6.Chinese or English interface can be optional . The unit (N,Lb,gf,kgf) can be switched freely .
2.7. The testing method can be set, saved and called for use from the saving record . The data and curve can be printed directly
2.8. The life damping curve can be created, the test report can be converted to Excel and PDF file format.
3. Typical Application:
3.1. The Multi-points compression:
   3.1.1. To use the compression pads with certain diameter to compress the device, can select the places of the device need to be compressed, and after setting the test parameters and the places, to start the test, the tester will compress the selected places automatically and auto stop after finishing the set cycles for all the selected places.
        To add the side load test fixture so that can do the side load test for the connectors.
3.1.2. In the parameter setting interface, Can set the compression force , cycles, compression holding time, compression speed. During the testing, it will generate the real-time graph "force vs time", and will auto save the test data and the test graph.
 3.1 3. The test graph. The Y axis is force,(unit can be N,Lb,gf,kgf), the X axis
      is time, the unit is Second. the setting for below graph is to compress 5kg to
      keep 5 second at the 5kg force .
3.2. button force testing:
3.2.1. Automatically inductive test method: no matter what height of the key is, it can be controlled by computer automatically through the test of the Button test method.
3.2.2. Can measure the force of the buttons and also do the fatigue test, it will generate the test graph and also can generate the life damping graph.
3.3. The 3pts & 4pts bending test
The 4 points bending test is the similar as the 3 Pts bending test, the difference is the fixture. So, here, the 3 Pts bending test will be introduced. There are two ways test for the 3 Pts bending in this tester, one is 3Pts bending fatigue test, and another is the 3 Pts bending strength test.
Specification:
Model
RS-6900H
Driving method of Z axis
Servo motor of Japanese Panasonic
Transducer
50N(5kgf)1000N(100kgf)
Range of driving(up and down)
0~150mm
Test range of load
0~50N(5kgf)or 0~1000N(100kgf)
Resolution of load
0.01N
Accuracy of load
±0.5%F.S
Test range of displacement
0~150mm
Resolution of displacement
0.001mm
Accuracy of displacement
±0.03mm
Range of test speed
0.1~150mm/min
Driving method of X-Y axis
Servo motor from Panasonic
Control way
X:(right and left) Y:(forward and backward)
Driving range
X:0~300mm Y:0~300mm
Resolution of displacement
0.002mm
Accuracy of displacement
±0.05mm
Range of moving speed
5~200mm/sec
Max size of specimen
W300xD300mm
Weight
About 250kg
Size of machine
W765xD895mmxH1250mm
Size with table
W1400xD900xH1900mm
And we have all kinds of Special Cover you need, and the color and material are various, of course you can also customize, we can meet all your requirements.
Model NO.: CMT-5
Test Force Measurement Range: 0.2%-100%Fs
Displacement Resolution: 0.025um
Tensile Stroke: 700mm
Voltage: 380V/50Hz
Trademark: Guangyue / OEM
Transport Package: Wooden or as Required
Specification: 5N-5KN
Origin: Qingdao, China
HS Code: 84778000
Model NO.: CMT-5
Test Force Measurement Range: 0.2%-100%Fs
Displacement Resolution: 0.025um
Tensile Stroke: 700mm
Voltage: 380V/50Hz
Trademark: Guangyue / OEM
Transport Package: Wooden or as Required
Specification: 5N-5KN
Origin: Qingdao, China
HS Code: 84778000
November 05, 2022