Why had the compressor been started frequently when S&A CW-5200 water chiller for 100W IPG fiber?

[ Would you please explain why the compressor has been started frequently when the CW-5200 water chiller is connected to our device?"

[Hello! Generally speaking, there is no problem if CW-5200 water chiller with 1400W cooling capacity is used to work for 100W IPG fiber laser. Would you please send an on-site picture to me?"

After observing the on-site picture from the customer, I found that the customer`s IPG fiber laser to be cooled was not a 100W but a 200W laser. For this reason, the cooling capacity of CW-5200 water chiller could not meet the cooling requirement of the device.

[Hello! As your fiber laser is a 200W laser, then our CW-6000 water chiller with 3000W cooling capacity would be more suitable to you."

After the communication with the customer, I contacted immediately the logistics department of S&A for the delivery of a CW-6000 water chiller so that the customer could receive it sooner.

[Things are totally different with CW-6000 water chiller. It works immediately with a good cooling effect after the connection. You`ve worked so efficient, GOOD!"

Anyway, thank you so much for your support and trust in S&A.

Starting from Jan. 2016, the warranty period of S&A water chillerhas been extended to 2 years as a guarantee for your confidence in us.

CW-6000 technical parameter: http://Products/ChillerCW60003000Wco.html