Nitrile gloves , medical gloves, disposable surgical gloves, safty gloves SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com
Even in the basic control, the X-ray security inspection machine must be locked. Remember to collect the key and check if the instrument is damaged. The damaged key cannot start the X-ray security inspection machine. Perform the following procedure to detect the X-ray security inspection machine.
1. Unlock the control panel and start the machine.
2. Make sure that the ready status is displayed on the monitor or control panel.
3. Place the detected item on the conveyor.
4. Start the conveyor.
5. Observe the conveyor belt to send the inspection item to the inspection cabin.
6. Make sure the X-ray lamp is on.
7. Observe the image of the detected item on the monitor.
8. Adjust the color, contrast, etc. controls to ensure that the corresponding image is legible.
9. Start the conveyor belt and allow the items to exit the security checker from the chute.
Note: The formal security inspection machine manufacturers will send out installers to install the security inspection machine. However, due to cost issues, no door installation will be performed except for the 8065 and 10080 security inspection machines because of the installation of the 5030A security inspection machine and the 6550 security inspection machine. Very simple, the phone guide installation can be. Training can also be used directly for training.
November 18, 2021