304/316L Sanitary Stainless Steel Clamped Weld Threaded Butterfly Valve

QILI is your source for a SS304 and SS316L Clamp Four Position Butterfly Valve to service the Bakery, Beverage, Cosmetic, Dairy, Food and Pharmaceutical Industries.

As you examine this valve with the pictures provided, look at the following features:

Our sizes ( 1" -- 6" ) valve is designed with (4) four positions so you can slowly open the valve and create less stress on the valve seat versus the open and close style of valve. Upon opening the valve, you have the option of two other positions for more or less flow depending on your needs. Since the valve comes standard with a clamp end, it is easy to assemble and disassemble when cleaning or working in a tight space.

We have provide a Black or blue Ball attached to the pull handle and interchangeability of the Handle to either side when placed in an area where a wall could be a problem and you can not open and close the valve.

QILI's Clamp Four Position Butterfly Valve is 100 percent Hydraulic Pressure Tested and 100 percent inspected, no special tools needed in the field to work on the valve, Silicone seats are standard. Check out the line space of each size of the valve and you will see that it matches with a few of the major competitors. 

As for the finish and all wetted surface, the sanitary finish is to a 25 Ra or better. We have each valve capped and bagged so you have no dings on the ends as well as permanently etching the size, alloy and heat number for full trace ability.

We can supply this butterfly valve with weld end, clamp end, thread end and flange end connection. 

Requiring more detail information or catalog pls don't hesitate to contact us. 

For all our products, we can also produce according to Our drawing if ur Specification is out of our standard.

Body Material:Forged 304(1.4301) or 316L(1.4404)
By CNC machine

 

Disk Material:Forged 304(1.4301) or 316L(1.4404)
By CNC machine

Seal Material:Silicone, EPDM, Viton and NBR is available.
Standard: Silicone for Germany imports

End Standard:DIN, SMS, 3A, SS, IDF, RJT, ISO ..etc.

End Size:DN10-DN150 or 1/2"-6"

Working pressure:-0.9 to 20 Bar

Working temperature:-10 oC up to 150 oC.

Sterilization150 oC (Max 20min)

Dial Regulators

DR20
Dial Regulator
1/4" and 3/8" dial regulator are the most popular models on the market.
Minimize air leakage and reduce rattle. A wing nut locks the damper in position.
The dial shows the damper position at a glance.
Can be mounted easily on round or rectangular ducts.
For dampers up to :250mm mm (10") Diameter
Set Includes.
Dial parts with handle
Wing nut ,washer & bolt
1/4"spring loaded end spindle
1/4" Square spindle

GOLMA-COOL ventilation was founded in 2005, we are the special manufacturer in the field of ventilation system. Having been engaged in HVAC/R industry for more than 10 years, we have accumulated rich product knowledge and experience for below productions: *Flexible air ducting*Aluminum Semi Rigid flexible duct*Flexible Duct Connector*Insulation pins*Duct fittings*Duct hardware*Pipe clamps and ventilation clamps*Air valve and diffuser *HVAC TAPE*A/C Brackets We possesses excellent manufacturing capability in the market to provide consistently high quality products. With abundant capital, a professional and experienced team and supports from our strong strategic partners .

GOLMA-COOL dedicates to develop continuous innovation technology, to keep our range of products up to date with the current trends and developments of HVAC/R industry.We are assure you with high quality, competitive price, fast delivery and efficient service all the time. We are here with you all the time.

Dial Air Regulators,Dial air regulator,Dialflow Regulator,Separated Type Dial Regulator

Ningbo Gemu Ventilation Technology Compnay Limited , https://www.golmacool.com