Model NO.: BLHB-5&BLHB-8 Hammer Disassemble Desk
Market: Global
Aplication: DTH Hammer Demount/Dismant Tool for Quarry Mining
Color: Blue, Other Color Available
Operation: Very Easy Poeration Steps.
Trademark: BESTLINK
Transport Package: Plywood Packing
Specification: CE &SGS
Origin: Xiamen China
HS Code: 82071990
DHT Hammer Breaout Bench from Xiamen Bestlink factory co., Ltd.

The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a breakout bench is the solution.

This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3-8".
The breakout bench is available in two designs, one for 3-5"hammer, and another for 6-8" hammer.
Note! ! ! The breakout bench is delivered with wrench keys.

The operation method as below:
1). Put hammer on the bench.
2). Adjust the position of the hammer and wrench; Use wrench to block the top sub side of hammer; Let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; Use wrench to block the drive chuck of hammer; Let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer.

Specifications
1. For disassembling the dth hammer
2. Easy operation
3. Low cost
4. For 3" to 30" hammers
5. CE certificate
Model BLHB-5 BLHB-8
Operate hammers 3-5" 6-8"
Length 920mm 1100mm
Width 510mm 620mm
Height 875mm 875mm
Weight 200kg 230kg
Spare parts list Part No
3-5" 6-8"
Compressing Jack CCX-01 CCX-01A
Upper lock block CCX-02 CCX-02A
Lower lock block CCX-03 CCX-03A
Wrench Jack CCX-04 CCX-04A
Oil Pump CCX-05 CCX-05A
 
Tools
Top sub wrench
Wrench flats(mm) Part No.
Flat 55mm HCCX-55
Flat 65mm HCCX-65
Flat 75mm HCCX-75
Flat 95mm HCCX-95
Flat 102mm HCCX-102
Flat 120mm HCCX-120
Flat 140mm HCCX-140
Driver sub wrench
Hammer Part No.
3.5" QCCX-3.5
4" QCCX-340
5" QCCX-350
6" QCCX-360
8" QCCX-380

4

4

4

Polycarbonate solid sheet

Polycarbonate Solid Sheet ,Solid Polycarbonate Roofing Sheets,Clear Solid Polycarbonate Sheet,4Mm Solid Polycarbonate Sheet

NINGBO CHAOMEI PLASTIC CO.,LTD , https://www.pcban88.com