PTA Powder
Main application:Repair and
strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding
machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high
temperature, concentrated energy, stable combustion, small heat affected zone,
fast welding speed, high production efficiency, easy to obtain low dilution
rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical
bonding,, bonding strength is high.
PTA welding technology is one of surface
strengthening methods, which has high deposition rate, low dilution rate, and
could be applied with many kinds of powder. The manufacturing craft of PTA
powder is normally gas atomization, which reduces satellite of powder. We
supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based
alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high
temperature resistance and wear resistance, it is the most popular alloy powder
applied by PTA welding both domestically and internationally. Coating hardness
is within the range of HRC 30-60. It could be applied to various industries
like agriculture, plastic, paper, marine and steel making where wear and
corrosion protection needed. Some examples are plunger, moulds, pump leaf and
screw.
Iron Based Alloy Powder is more widely used
and a more economic choice. With high abrasive resistance, it is more commonly
applied to mining tools, drilling tools and mixers of iron and steel making
industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended
for corrosion and oxidation resistance, with better hot hardness values than
equivalent Nickel based alloy powder. It is widely applied to steel making
industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi
mixing with other hard-phase powder such as cast tungsten carbide and other cemented
alloy powder, which allows the powder better hardness around HRC60 and
excellent abrasion resistance.
Mixed powder is more often used for mining
equipment for oil sands, lignite, oil drilling tools, excavator buckets,
extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
Kunshan Baichuan Precision Parts Co., Ltd was founded in 2006, locates in China's rapid development economic area Kunshan, Jiangsu province. We have an outstanding team of design, R&D, and processing. Since its establishment, we have provided a number of services for wellknown enterprises with parts designing and processing services, such as Foxconn, KONKA and so on.
Â
Products name
Bck0090 Customize Aluminum Lampshade and other cover products
Material
Steel,Brass,Copper,Stainless steel,Plastic,Aluminium,POM,
Delrin,Titanium Alloy etc.
Surface treatment
Anodization,Zinc plating,Chemical fim,Powder,Passivation,
Sandblasting,Brushing & Polishing ETC.
Processing equipments
cnc machining center,cnc lathe,grinding machine,automatic
 lathe machine,conventional lathe machine,milling machine,
drilling machine,EDM etc.
Drawing format
pdf. dwg.  igs.  stp./ etc.
Terms of trade
EXW,FOB,CIF
Terms of payment
T/T, Paypal, L/C,Western Union
Packing
Foam,Carton,Wood boxes
Shipping
DHL/UPS/FedEx
our other samples
Sample
1) sample fee:The sample fee just the cost price , the sample fee is refundable if you place a big order later
2) freight: we usually send samples through Express such as UPS, DHL, Fedex, etc. or on your own requirement
3) sample time: 7-10 days
Service
1)Your inquiry will be replied within 12 hours.
2)Well-traind&experienced sales can reply your inquiries in English.
3)During working time,E-mail will be replied to you within 2 hours.
4)OEM&ODM projects are highly welcomed ,we have strong R&D team.
5)The order will be produced exactly according to order details and proofed samples,our QC will submit inspection report before shipment.
6)Your business relationship with us will be confidential to any third party.
7)Good after-sale service.
NOTE
All parts are not in stock, custom made according to customer's drawings or samples!If you have any parts to be made, please feel free to send your kind drawings
Aim
The company aim: high quality, low price, good service.
We are the manufacturers ,not the traders.
FAQ
1: how to contact with sales ?
A:you can send inquiry of our products,it will be replied within 12 hours;
you can contact dirrectly with our sales through Alitalk or WhatsApp,Skype as you like.
2.What information should I give to you for inquiry?
If you have drawings or samples,pls feel free to send us,and tell us your special requirements  such as material ,tolerance,surface treatments  and the amount you need,ect .
 3. how about certificate?
We will make 100% full inspection and provide the inspection reports.
4.Is it possible to return the money if the quality is not good?
This has never been occured right now ,as we treat the quality as our key of development.Quality and service is everything for us.
Â
Company Information
Kunshan Baichuan Precision Parts Co., Ltd was founded in 2006, locates in China's rapid development economic area Kunshan, Jiangsu province. We have an outstanding team of design, R&D, and processing. Since its establishment, we have provided a number of services for wellknown enterprises with parts designing and processing services, such as Foxconn, KONKA and so on.
Â
Products name
Bck0090 Customize Aluminum Lampshade and other cover products
Material
Steel,Brass,Copper,Stainless steel,Plastic,Aluminium,POM,
Delrin,Titanium Alloy etc.
Surface treatment
Anodization,Zinc plating,Chemical fim,Powder,Passivation,
Sandblasting,Brushing & Polishing ETC.
Processing equipments
cnc machining center,cnc lathe,grinding machine,automatic
 lathe machine,conventional lathe machine,milling machine,
drilling machine,EDM etc.
Drawing format
pdf. dwg.  igs.  stp./ etc.
Terms of trade
EXW,FOB,CIF
Terms of payment
T/T, Paypal, L/C,Western Union
Packing
Foam,Carton,Wood boxes
Shipping
DHL/UPS/FedEx
our other samples
Sample
1) sample fee:The sample fee just the cost price , the sample fee is refundable if you place a big order later
2) freight: we usually send samples through Express such as UPS, DHL, Fedex, etc. or on your own requirement
3) sample time: 7-10 days
Service
1)Your inquiry will be replied within 12 hours.
2)Well-traind&experienced sales can reply your inquiries in English.
3)During working time,E-mail will be replied to you within 2 hours.
4)OEM&ODM projects are highly welcomed ,we have strong R&D team.
5)The order will be produced exactly according to order details and proofed samples,our QC will submit inspection report before shipment.
6)Your business relationship with us will be confidential to any third party.
7)Good after-sale service.
NOTE
All parts are not in stock, custom made according to customer's drawings or samples!If you have any parts to be made, please feel free to send your kind drawings
Aim
The company aim: high quality, low price, good service.
We are the manufacturers ,not the traders.
FAQ
1: how to contact with sales ?
A:you can send inquiry of our products,it will be replied within 12 hours;
you can contact dirrectly with our sales through Alitalk or WhatsApp,Skype as you like.
2.What information should I give to you for inquiry?
If you have drawings or samples,pls feel free to send us,and tell us your special requirements  such as material ,tolerance,surface treatments  and the amount you need,ect .
 3. how about certificate?
We will make 100% full inspection and provide the inspection reports.
4.Is it possible to return the money if the quality is not good?
This has never been occured right now ,as we treat the quality as our key of development.Quality and service is everything for us.
Â
Color: Can Anode to The Other Colors
Process: CNC Machining
Tolerance: According to Customer Requirements
Transport Packaging: Can Be Arranged According to Customer′s Requiremen
Size: Custom
MOQ: 1 Piece
Auxiliary Tool: Fixture
Surface Treatment: Sandblasting and Anodizing
Material Type: Aluminum 5052 / 6061 / 7075 / etc.
Product Positioning: Custom CNC Machining Aluminum Parts
Trademark: baichuan
Transport Package: Cartons
Specification: Design according to the dimensions of the drawing
Origin: Jiangsu
Color: Can Anode to The Other Colors
Process: CNC Machining
Tolerance: According to Customer Requirements
Transport Packaging: Can Be Arranged According to Customer′s Requiremen
Size: Custom
MOQ: 1 Piece
Auxiliary Tool: Fixture
Surface Treatment: Sandblasting and Anodizing
Material Type: Aluminum 5052 / 6061 / 7075 / etc.
Product Positioning: Custom CNC Machining Aluminum Parts
Trademark: baichuan
Transport Package: Cartons
Specification: Design according to the dimensions of the drawing
Origin: Jiangsu
Company InformationAugust 02, 2024