Model NO.: PE-1000*1200
Certification: CE, ISO
Condition: New
Color: Customized
Delivery Time: 15 Days
After Sales Service: for The Whole Using Life
Test and Installation: Engineer Assigned
Complains Response Time: Within 24 Hours
Process: Welded
Genuine Spare/Wear Parts Supply: Yes
Trademark: WHITE LAI
Transport Package: Nude or Wooden Case
Origin: Shanghai China
HS Code: 8474209000
Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200) Specifications:
Model Size of feed
 opening		 Max. feed 
size		 Capacity Eccentric shaft 
rotation speed		 Electric motor
 power		 Adjustable range of
 discharge opening		 Weight
(mm × mm) (mm) (t/h) (r/min) (kW) (mm) (t)
PE-250×400 250×400 210 5~30 300 15 20-60 2.8
PE-400×600 400×600 340 16-65 275 30 40-100 6.5
PE-500×750 500×750 425 45-100 275 55 50-100 10.1
PE-600×900 600×900 500 50-120 250 55-75 65-160 15.5
PE-750×1060 750×1060 630 52-180 250 110 80-140 28
PE-800×1060 800×1060 650 85-143 250 110 100-200 30
PE-870×1060 870×1060 670 181-210 250 110 200-260 30.5
PE-900×1200 900×1200 750 140-260 200 110-132 95-165 50
PE-1000×1200 1000×1200 850 160-300 200 110-132 195-265 51
PE-1200×1500 1200×1500 1020 300-600 180 160 150-300 100.9
PEX-250×750 250×750 210 8~30 330 22 25-60 4.9
PEX-250×1000 250×1000 210 16-52 330 30-37 25-60 6.5
PEX-250×1200 250×1200 210 20-60 330 37 25-60 7.7
PEX-300×1300 300×1300 250 20-90 330 55 20-90 11

Big  Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200)Introduction&Application:
Jaw crusher is widely used in the industry of mining, metallurgy, construction material, highway, railway, water conservancy and chemical with compression strength less than 350Mpa. It is preferred option for the complete crushing line as the primary crusher.

Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200) Features&Advantages:
1-Thich steel Plate welded body frame     2-Short toggle
3-Easy maintenance  4-Bing swing angle   5-Low hanging

Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200) Working Principle:
The working principle of jaw crusher is very simple. The whole crushing process rely on the relative motion of the two jaw plates. One of the jaw plates stay still while the other move against it. And with the movement, the materials between the two plates would be crushed into small elements. While the plates move against each other, the materials would be crushed and while plates move away from each other, the broken materials which are smaller enough would drop through the discharging opening. And due to the simple structure, jaw crusher is easy to maintain and repair. These features promote its popularity to a great extant.
Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200)

Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200) On Site:
Big Primary Rock Stone Jaw Crusher PE-1000*1200 (PE1000X1200)

Warranty And After-sales Service:
1.One year warranty excluding wearing parts
2.Professional technical supports for whole using life.
3.Complains respose within 24 hours.
4.Use-friendly English operation manual
5.Engineers could be assigned to the quarry site to help installation and testing , when requested by customer.

ASME B16.5 has endorsed the design of Long Welding Neck Flange (LWN), which is also known as straight hub welding flange. The LWN Flange is constructed by two sections: the upper section is a heavy-wall barrel, whilst the lower section is a disc-like Plate Flange with all dimensions conforming to ASME B16.5 standard flanges.

Application
The long welding neck flange is mainly applied to the construction of pressure vessel functioning as a nozzle (such as a thermowell nozzle). To attach a common welding neck flange to a pressure vessel, a piece of pipe is required with additional welding. A LWN flange on the other hand attaches directly to the vessel, hence, it can be viewed as an integrally reinforced nozzle. It avoids making a weld seam at pipe to flange and provides self-reinforcement.

sales@ghsailingpipe.com

Size: 1/2''~24'' 

Class Rating: 150~2500 

Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face) 

TG(tongue and groove face);MFM(male and female face) 

Manufacturing process: Push, Press, Forge, Cast, etc. 

 

Material: 

Carbon steel:

ASTM A105;  

ASTM A266 GR.1,GR.2,GR.3,GR.4 

 

Stainless steel: 

304/SUS304/UNS S30400/1.4301

304L/UNS S30403/1.4306;

304H/UNS S30409/1.4948;

309S/UNS S30908/1.4833

309H/UNS S30909;

310S/UNS S31008/1.4845;

310H/UNS S31009;

316/UNS S31600/1.4401;

316Ti/UNS S31635/1.4571;

316H/UNS S31609/1.4436;

316L/UNS S31603/1.4404;

316LN/UNS S31653;

317/UNS S31700;

317L/UNS S31703/1.4438;

321/UNS S32100/1.4541;

321H/UNS S32109;

347/UNS S34700/1.4550;

347H/UNS S34709/1.4912;

348/UNS S34800;

 

Alloy steel: 

ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;

ASTM A182 F5a/F5/F9/F11/F12/F22/F91;

ASTM A350 LF1/LF2/LF3;

 

Duplex steel: 

ASTM A182 F51/S31803/1.4462;

ASTM A182 F53/S2507/S32750/1.4401;

ASTM A182 F55/S32760/1.4501/Zeron 100;

2205/F60/S32205;

ASTM A182 F44/S31254/254SMO/1.4547;

17-4PH/S17400/1.4542/SUS630/AISI630;

F904L/NO8904/1.4539;

725LN/310MoLN/S31050/1.4466

253MA/S30815/1.4835;

 

Nickel alloy steel:

Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;

Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;

Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;

Alloy K-500/Monel K-500/NO5500/2.475;

Alloy 600/Inconel 600/NO6600/NS333/2.4816;

Alloy 601/Inconel 601/NO6001/2.4851;

Alloy 625/Inconel 625/NO6625/NS336/2.4856;

Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;

Alloy 800/Incoloy 800/NO8800/1.4876;

Alloy 800H/Incoloy 800H/NO8810/1.4958;

Alloy 800HT/Incoloy 800HT/NO8811/1.4959;

Alloy 825/Incoloy 825/NO8825/2.4858/NS142;

Alloy 925/Incoloy 925/NO9925;

Hastelloy C/Alloy C/NO6003/2.4869/NS333;

Alloy C-276/Hastelloy C-276/N10276/2.4819;

Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;

Alloy C-22/Hastelloy C-22/NO6022/2.4602;

Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;

Alloy B/Hastelloy B/NS321/N10001;

Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;

Alloy B-3/Hastelloy B-3/N10675/2.4600;

Alloy X/Hastelloy X/NO6002/2.4665;

Alloy G-30/Hastelloy G-30/NO6030/2.4603;

Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;

Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;

Alloy 31/NO8031/1.4562;

Alloy 901/NO9901/1.4898;

Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;

Inconel 783/UNS R30783; 

NAS 254NM/NO8367;

Monel 30C

Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952

Nimonic 263/NO7263

Nimonic 90/UNS NO7090;

Incoloy 907/GH907;

Nitronic 60/Alloy 218/UNS S21800




LWN Flange

LWN Flange,Lwn Forged Flange,ASME LWN Flange,Long Welding Neck Flange

He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com

August 29, 2020