Our fiber laser marking machine Installed the backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.                                        Our fiber laser marking machine Installed the backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator. ABS or PC Electroplating Production Line
The plastic plating production line is widely used in industries as car decorative parts, mobile phone decorative parts and logo signs. With the enlargement of the application of engineering plastics, plastic plating are expanding the using scope, mainly for the ABS, PC electroplating processing.
In the development process of automobiles and motorcycles pursuing lightweight and luxurious beauty, plastic electroplating has played a vital role. From door handles, car trademarks, nameplates, car interiors, reflectors, dial decorations to operating rod heads, steering wheel decorations, high-end wheel shell covers, grilles, decorative strips, etc., a large number of plastic electroplated products are used. Not only are automotive decorative parts, there are also a large number of plastic electroplated products on motorcycles and bicycles. Abs Plating Line,Gold Plating Line,Nickel Plating Line,Plastic Plating Production Line Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com
        Cobalt chrome steel laser marking machine/steel laser marker
1, Machine main Features:
Suntop laser develop and produce complete air cooling Fiber Optical Laser marking system in China. out laser marking machine with the characteristics of environmental friendly, low consumption, fully automatically and leading laser system.
This creative laser system make the optical conversion rate up to 38%-50%, so only air cooling can meet the system requirements, this laser system is Small and compact size, Fiber output, can apply flexibly, and easy to make 3D processing system.
Rapid cache transmission control and selective elements greatly ensure long-time work continuously, to ensure the Production capability Control of ± 0.1C° High precision, perfect control board and optimal controlling system design carefully ensure the processing production rate. Quick speed, High impulse power, little electricity consumption, Low operation cost, No consumables.
We can customized different kinds of laser marking system depend on customer's actual requirements.
2, The machine applications & Materials:
The fiber optic laser marker has advantage of high beam quality and high reliability. It is suitable for processing fields that need high marking depth, smoothness and accuracy. It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, kitchen and bathroom appliance etc...
some main materials type as follows:
17-4 PH stainless steel
Magnesium
303 stainless
Metal-plated ceramics
4043 steel
Molybdenum
6061 Aluminum
Nickel plated 1215 mild steel
ABS (white/black)
Nickel plated brass
Aluminum, 6061
Nickel plated gold
Aluminum, yellow chromate
Nickel plated Kovar
Bayer 2807 Makrolon polycarbonate
Nickel plated steel
Bayers bayblend FR110
Nylon
Black/white ABS
PEEK, white
Brass
Polybutylene Terephthalate
Black/white polycarbonate
Polycarbonate (black/white)
Brushed aluminum
Polycarbonate resin 121-R, GE Plastics
Carbon fiber
Polycarbonate, Bayer 2807 Makrolon
Carbon nanotube
Polysulphone
Ceramics, metal-plated
Rynite PET
Clear coat anodized aluminum
Santoprene
Cobalt chrome steel
Silicon carbide
Colored delrin (black/brown)
Silicon steel
Compacted powder iron with phosphate coating
Silicon wafers
Copper
Stainless steel 303
DAP - Diallyl Phthalate
Stainless steel 17-4 PH
Delrin, colored (black/brown)
Steel 4043
GE Plastics polycarbonate resin 121-R
Steel, machine tool
Glass filled PEEK
Various inconel metals (nickel-chromium super alloys)
Glass filed Teflon
White PEEK
Hard coat anodized aluminum
Yellow chromate aluminum
Inconel metals (various)
Zinc plated mild steel
Machine tool steel
And Many More!
3, Â Our fiber laser marking machine main parameters:
Model
ST-FL10 series
ST-FL20 series
ST-FL30 series
ST-FL50 series
Laser power
10W
20W
30W
50W
Length of laser weave
1064nm
1064nm
1064nm
1064nm
Marking scope
110x110~200x200mm
110x110~250x250mm
110x110~250x250mm
110x110~ 300x300mm
Mark depth
0.3mm
0.4mm
0.6mm
1.0mm
Marker speed
≤15000mm/s
≤15000mm/s
≤15000mm/s
≤15000mm/s
Min line width
0.05mm
0.05mm
0.05mm
0.05mm
min character
0.15 mm
0.15 mm
0.15 mm
0.15 mm
Repeat precision
±0.002mm
±0.002mm
±0.002mm
±0.002mm
Gross power
0.4KW
0.5KW
0.6KW
1KW
Power supply
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
Operating temperature
10-35°C
10-35°C
10-35°C
10-35°C
Remark: the laser power 10W and 20W mainly for marking and engraving, the laser power 30W and 50W can do the laser cutting and deep laser engraving on materials.
4, Laser marking samples of this machine as follows for reference:
Â
        Cobalt chrome steel laser marking machine/steel laser marker
1, Machine main Features:
Suntop laser develop and produce complete air cooling Fiber Optical Laser marking system in China. out laser marking machine with the characteristics of environmental friendly, low consumption, fully automatically and leading laser system.
This creative laser system make the optical conversion rate up to 38%-50%, so only air cooling can meet the system requirements, this laser system is Small and compact size, Fiber output, can apply flexibly, and easy to make 3D processing system.
Rapid cache transmission control and selective elements greatly ensure long-time work continuously, to ensure the Production capability Control of ± 0.1C° High precision, perfect control board and optimal controlling system design carefully ensure the processing production rate. Quick speed, High impulse power, little electricity consumption, Low operation cost, No consumables.
We can customized different kinds of laser marking system depend on customer's actual requirements.
2, The machine applications & Materials:
The fiber optic laser marker has advantage of high beam quality and high reliability. It is suitable for processing fields that need high marking depth, smoothness and accuracy. It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, kitchen and bathroom appliance etc...
some main materials type as follows:
17-4 PH stainless steel
Magnesium
303 stainless
Metal-plated ceramics
4043 steel
Molybdenum
6061 Aluminum
Nickel plated 1215 mild steel
ABS (white/black)
Nickel plated brass
Aluminum, 6061
Nickel plated gold
Aluminum, yellow chromate
Nickel plated Kovar
Bayer 2807 Makrolon polycarbonate
Nickel plated steel
Bayers bayblend FR110
Nylon
Black/white ABS
PEEK, white
Brass
Polybutylene Terephthalate
Black/white polycarbonate
Polycarbonate (black/white)
Brushed aluminum
Polycarbonate resin 121-R, GE Plastics
Carbon fiber
Polycarbonate, Bayer 2807 Makrolon
Carbon nanotube
Polysulphone
Ceramics, metal-plated
Rynite PET
Clear coat anodized aluminum
Santoprene
Cobalt chrome steel
Silicon carbide
Colored delrin (black/brown)
Silicon steel
Compacted powder iron with phosphate coating
Silicon wafers
Copper
Stainless steel 303
DAP - Diallyl Phthalate
Stainless steel 17-4 PH
Delrin, colored (black/brown)
Steel 4043
GE Plastics polycarbonate resin 121-R
Steel, machine tool
Glass filled PEEK
Various inconel metals (nickel-chromium super alloys)
Glass filed Teflon
White PEEK
Hard coat anodized aluminum
Yellow chromate aluminum
Inconel metals (various)
Zinc plated mild steel
Machine tool steel
And Many More!
3, Â Our fiber laser marking machine main parameters:
Model
ST-FL10 series
ST-FL20 series
ST-FL30 series
ST-FL50 series
Laser power
10W
20W
30W
50W
Length of laser weave
1064nm
1064nm
1064nm
1064nm
Marking scope
110x110~200x200mm
110x110~250x250mm
110x110~250x250mm
110x110~ 300x300mm
Mark depth
0.3mm
0.4mm
0.6mm
1.0mm
Marker speed
≤15000mm/s
≤15000mm/s
≤15000mm/s
≤15000mm/s
Min line width
0.05mm
0.05mm
0.05mm
0.05mm
min character
0.15 mm
0.15 mm
0.15 mm
0.15 mm
Repeat precision
±0.002mm
±0.002mm
±0.002mm
±0.002mm
Gross power
0.4KW
0.5KW
0.6KW
1KW
Power supply
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
220V(±10%)/50Hz/ 3A
Operating temperature
10-35°C
10-35°C
10-35°C
10-35°C
Remark: the laser power 10W and 20W mainly for marking and engraving, the laser power 30W and 50W can do the laser cutting and deep laser engraving on materials.
4, Laser marking samples of this machine as follows for reference:
Â
Model NO.: ST-FL20-CCSM
Type: Optical Fiber Laser Marking Machine
Marking Method: Scanning Marking
Laser Scanner Range: 100*100mm ( Optional for Other Size)
Laser Lifetime: 100000 Hours
Max.Laser Marking Speed: 7000mm/S
Control Method: Automatic
Beam Quality: <1.5
Laser Frequency: 20kHz-100kHz Continuous Adjustable
Current and Power: AC 220V,50Hz
Power Consumption: 600W
HS Code: 84561000.90, 8456100090
Trademark: Suntop
Transport Package: Plywood Box
Specification: 1100*950*1550mm
Origin: China
Model NO.: ST-FL20-CCSM
Type: Optical Fiber Laser Marking Machine
Marking Method: Scanning Marking
Laser Scanner Range: 100*100mm ( Optional for Other Size)
Laser Lifetime: 100000 Hours
Max.Laser Marking Speed: 7000mm/S
Control Method: Automatic
Beam Quality: <1.5
Laser Frequency: 20kHz-100kHz Continuous Adjustable
Current and Power: AC 220V,50Hz
Power Consumption: 600W
HS Code: 84561000.90, 8456100090
Trademark: Suntop
Transport Package: Plywood Box
Specification: 1100*950*1550mm
Origin: China
October 16, 2024