1. Check whether the belt drive part is in good contact before driving, whether the tension is suitable, whether the bolts and rollers of each component are in good condition, and whether there is any blockage in the feeding and discharging.

2. Check if there is any debris under the belt, whether the first tail wheel and the roller are muddy, if any, remove it immediately.

3, check the suspension magnet performance is good, it is working properly.

4. Before driving, you should send a signal to contact the relevant post before you can drive.

5. It is strictly forbidden to ride, climb, or cross the rotating belt.

6. When the roller is not turned or lacks oil, it must be replaced and repaired. The belt conveyor in operation must not be inspected, repaired, oiled and cleaned. It is strictly forbidden to touch the roller and the first and last wheels by hand.

7. When the machine stops, it should stop the signal and then stop in sequence.

8. When the belt runs off, it should be treated immediately to prevent tearing the belt.

9. When the accident stops, the switch should be pulled down immediately.

Epoxy Putty

It is available in metal, ceramics, stone material , concrete, glass. It mainly used in the pipeline dripping of a water clock, sanitary equipment breakage patching and the peripheral seal , swins the pond, the roof, the bathroom , the basement leakage , the balcony seal, the solar energy installment, casting patching, the cultural relic repair and maintenance, the utensil anticorrosion protection , the estate management , the construction and installation , the project service , the pipeline connection moleling, the pactterm making and so on.

Epoxy Putty,Epoxy Putty Glue,Epoxy Repair Putty,Epoxy Putty Adhesive

Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net