Galvanized steel sheet is carbon steel sheet coated with zinc on two sides. the process used to do this is known as the continuous hot dip process. this process results in a layer of zinc which adheres tightly to the base steel and has a spangled, or snowflake-type, appearance. The layer of zinc acts as a sacrificial coating.
Galvanised steel is mild steel with a coating of zinc The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel Galvanised steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion. Galvanized Steel Sheet, Hot Dipped Galvanized, Galvanized Sheet Coil, Gi Sheet Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
Product Type:
Brake Linings
Material:
Asbestos; Semi-metallic; Non-asbestos; Ceramic etc.
Model:
19495
specification:
Outer Arc:180mm
Width:178mm
Thickness:17.3/12.1mm
Material service life:
Asbestos: 30000 to 40000 kilometers
Non asbestos: 70000 to 80000 kilometers
Ceramic: 100000 kilometers up
Packing:
4 pieces per shrink wrapped bag, 2 sets per inner box, two boxes per one export carton Can be packed as per your requirement.
Sample:
Free of charge
MOQ:
2000 pcs
Delivery time:
25 -40days for one container
Delivery port:
Ningbo Port
Production capacity:
300000 pieces per month
Application
Man , Benz, Renault, Steyr, Van Hool
1) Good heat dissipation
2) Do not damage the drum
3) Low noise
4) High temperature resistant
5) Environment-friendly
3. Testing Result
Inspection Item
Test Result
NormalTemperature Friction Coefficient(100-150ºC)
0.42±0.02
Hot Friction Coefficient(250ºC-300ºC)
0.42±0.01
Wear Rate(×10-7m3/Nm150ºC)
0.26-0.53
Density(g/cm3)
2.02
Impact Force(J/cm2)
0.46
Los's strength(HRM)
51
Shear strength in(MPa)
20.52
Compression strength(N/mm2)
84.49
Thermal Expansivity/%
0.89
4.Company introduce
Adhere the quality of scientific and technological innovation
Technology innovation is the first productive force of enterprise development, with the advanced technology, can make the enterprise quickly occupied the advantage position in the competition, continued to have the ability of innovation, in order to ensure an invincible position in the market competition.
With 20 experience in this area, Feiying is more clear then anyone on this point, we pay more attention on the technology research and development, continue to increase the investment of hardware equipment, also pay attention to staffs training and the introduction, the company have staffs more than 400 people, inside  15 senior engineer ,  78 people have university degree, the company plans to annually increase the proportion of funds for scientific research and gradually to information and digital chemical control mode of production enterprises.
Feiying is the first one using the German brake pads Automatic technology production line , Every year will develop more than 10 high-end r R & D formula product and sell worldwhile .the company have passed the ISO / TS16949 quality system certification, for production process control, there are strict requirements, to ensure that the factory's each a product is safe and reliable, excellent qualitified products
Â
Hot-Dip Galvanizing or HDG is a process in which zinc bonds to steel at the molecular level to produce a four-layer corrosion-resistant finish. The first three layers are zinc-iron alloy layers that are actually harder than the base steel. The fourth or top layer is pure zinc.
July 24, 2024