First, the preparation 1. The instrument placed on a stable surface of the water platform, loosen the bottom protection screws 2-3mm

2. Open the heating system and place the tripod and sample tray.

3. Connect the power and turn it on.

4. Instrument weight display: 0.00. Put a 20g weight and display 20.00g. If non-20.00 is displayed, remove weight, (zero), press (calibrate), put weight, and the instrument automatically calibrates. After the calibration is completed, the instrument displays 20.00g and removes the weight.

Second, sample detection 1, set the temperature.

2, sampling. Sampling 3.5g, take out the sample pan, and flatten. If there is a large particle sample, crush or remove it.

3, close the heating system, and other stable weighing.

4. Press (↑) key and press (Test) key. Instrument work.

5. Press the (display) key after the measurement is completed to record the data.

6. Change to another sample tray and press the (clear) key. (zero), wait for the next measurement.

Third, the instrument maintenance 1, the use of the environment: dust, dry, no vibration.

2, the instrument remains clean.

3, ★ weighing can not overload or oppress the weighing system. Be sure to pay attention.

4. If the heat lamp is dirty, wipe it regularly.

Plastic Beverage Bottles

Plastic Beverage Bottles,Plastic Juice Bottles,Square Juice Bottles with Lid,Juice Bottle with Cap,Beverage Bottles with Lid

Wuxi Yogo Material Co.,Ltd , https://www.yogobottle.com