Front Grill Part Injection Mould
In addition to beauty, the biggest role of the front grille is to intake and reduce air resistance. The greater the influence of the front grille on the resistance of the engine compartment, the engine compartment resistance accounts for about 10% of the total resistance, the active closing of the grille is conducive to reducing the resistance in the engine compartment. In addition, the front grille also plays a role in cooling The front grille is a passageway between the outside world and the engine compartment, through which air enters the engine compartment, taking heat from the radiator and cooling it.
The main function of the front grille is heat dissipation and air intake if the engine radiator water temperature is too high to fully dissipate by natural air intake, the fan will automatically start the auxiliary heat dissipation car running air is backward flow, fan airflow direction is backward, after heat dissipation, the air temperature rises from the rear of the engine cover near the windshield position And then the underside of the car, which is open, flows backwards, heat is released and then there's aerodynamic stroke resistance
Swift Front Grill,Car Grill Mesh,Front Grille,Jeep Front Grill Taizhou Huangyan Xingtai Plastic Mould Co., Ltd. , https://www.xingtaimould.com
1.Introduction of warehouse electric flat vehicle
Transfer Cart: Rail transfer cart, Trackless transfer car, Battery operated transport trolley, Coils cart, Ladle transfer cart, Hydraulic scissors lift table cart etc.
Industrial Trailer:Â Flatbed trailer, Factory trailer, Utility trailer, Workshop transfer trailer, Airport baggage cargo trailer, Car transport trailer, Motorized transfer trailer etc.
Cargo Transportation:Die cart, Coils transport cart, pipes transfer carriage, steel beam transporter, aluminum plate transport vehicle, Â transformer carrier bogieÂ
Speical Handling Equipment: Ladle transfer trolley, Ferry Transfer wagon, Cross-rail transport equipmet, Motorized turntable, Â Vacuum furnace transfer cart, Automatic vehicle etc.
2.Application of warehouse electric flat vehicle
For horizontal load transfers of a wide range of material, we have the heavy duty, high quality Transfer Cart solution you need. Transfer carts are used: to carry loads along assembly lines; transfer material from one work station to the next; store and transport an entire shift worth of production;new factory building project;cargo horizonal transportation system. They can even be used as a stable yet moveable machine base. With four different styles and standard capacities up to 300 tons, we have the solution you need and each style can be designed for your specific application.
3.Applicable sites of warehouse electric flat vehicle
PERFECT treats the integrated management idea as a crucial tool to realize value for the benefits and requirements of the final customers and to promote the business on the national and international markets.The continuous tenacity of the quality management method makes our company to take responsibility for the handling problems of the customers and to solve and provide the most suitable way from a functional, technical, quality and commercial viewpoint.PERFECT conceives and manufactures a wide range of railway guided transfer carts, battery powered trolleys, intelligent self-propelled trolleys, die carts, industrial flat trailers, tilters and lifting platforms that operate in many industrial fields: metallurgy, manufacture, oil and gas, die shops, shipyards, chemical plant, automotive, mining industry, aerospace, power generation, coal industry, paper mills, metalworking, warehouse and many others!
4. Parameter of warehouse electric flat vehicle
Model
BXC-2t
BXC-20t
BXC-50t
BXC-100t
BXC-150t
Rated Load(t)
2
20
50
100
150
Table Size (mm)
Length(L)
2000
4000
5500
6500
10000
Width(W)
1500
2200
2500
2800
3000
Height(H)
450
550
650
900
1200
Wheel Base(mm)
1200
2800
4200
4900
7000
Rail Inner Gauge(mm)
1200
1435
1435
200
2000
Wheel Diameter (mm)
270
350
500
600
600
Running Speed (m/min)
0-25
0-20
0-20
0-20
0-18
Motor Power(kw)
1
2.2
5
10
15
Battery Capacity
180
180
330
440
600
Battery Voltage
24
48
48
72
72
Running Time When Full Load
4.32
4
3.3
3.2
2.9
Running Distance for One Charge(km)
6.5
4.8
4
3.8
3.2
Recommended Rail Model
P15
P24
P43
QU100
QU100
5.Manufacturing process of warehouse electric flat vehicle
CNC Cutting
Transport the steel plate from raw material warehouse to CNC cutting workshop for cutting. After the cutting, the workers will do some simple processing such as chip moving and setting out.
Preliminary Assembling
Put the cut steel plate together according to the design drawing
Welding
Weld the steel plate with automatic welding machine after the preliminary assembling
Post weld treatment
Test the welding section after the welding, polish and burring. Post weld treatment to eliminate welding stress
Spray Primer
Transport the structure part after processing to painting booth for spraying primer. The main component of the primer is zinc rich epoxy antirust paint. The primer is to two layers
Assembling
Assemble the structure parts after spraying primer with wheels, motors and gear box, etc.
Paint finish
Transport the assembled cart to painting booth, inspect the integrity of primer. After that paint the finish
Debugging
Debugging the cart after painting the finish with electric control system, after the debugging, the cart will test without load. And after the no load test, the cart will be tested with load. After the inspection, the cart will be transported to storage area.
6. Our Factory 
7. Q&A
Will A Transfer Cart Be A Good Solution?
A good question to ask since there are many material handling solutions on the market! Which one is the right choice? For starters, transfer carts are moveable platforms used for the horizontal movement of materials, assemblies, and other items. Consideration must be given to the weight of the load and the travel requirements for the application.
What Are The Advantages of Using a Transfer Cart?
For smaller loads, manual carts can be dedicated to specific work place activities such as shuttling materials. This often makes the carts more available for use. Transfer carts are more accommodating for moving long loads through restrictive passage ways or doorways. For heavier loads transfer carts are an excellent affordable choice for their ability to handle heavy loads. Transfer carts are compact in design and work well in areas with limited floor area. Another advantage over lift trucks is how the cart deck can be customized to suit specific loads.
What Product Handling Applications Use Transfer Carts?
1.  Coils (V-Groove deck)
2.  Tanks (size/stability for uniformly distributed loads)
3.  Assemblies (fixture cradle) for a complete build or to send a partially completed product to the next station (tractors, heavy equipment machinery)
4.  Sub-Assembly shuttle from one line to another line
5.  Maintenance cart for motors and pumps
6.  Equipment support (stand-off deck) for navigating loads to locations with a plant facility
7.  Material shuttle for steel tubing (flat decking with guard rails)
8.  Elevating platform for assembly process (integrated screw-jack table)
9.  Sand casting (flat decking)
Model NO.: BXC
Control Mode: Pendant/Remote/PLC Control
Power Mode: Battery, Cable, Conductive Rails
Color: Customzied
Material: Steel
Trademark: PERFECT
Transport Package: The Whole Cart Will Be Packed by Tarp.
Specification: 2000*2000*500
Origin: Xinxiang
HS Code: 84289090
Heavy Industry applied high quality electric flat vehicle for transportation
PERFECT is specialized in designing and manufacturing of heavy duty material transport equipment:
Uses of heavy duty motorized industrial transfer flat carts:February 27, 2024