Imported steam valve basic principles and methods of use:


First, the basic principle:


1, the pressure regulating range: It refers to the pressure regulating valve output pressure P2 adjustable range, within the scope of this requirement to achieve the required accuracy. Regulating pressure range and the main degree of pressure on the degree of spring.


2, the pressure characteristics: It refers to the flow rate g is set value, due to input pressure fluctuations caused by the pressure fluctuations in the output characteristics. The smaller the output pressure fluctuation, the better the characteristics of the pressure reducing valve. The output pressure must be lower than the input pressure - the setting will not substantially change with the input pressure.


3, the flow characteristics: It refers to the input pressure - timing, the output pressure g with the output flow changes in the holding capacity. When the flow rate g changes, the output pressure changes as small as possible. The lower the general output pressure, the smaller it fluctuates as the output flow changes.


Second, the use of methods:


1, First of all, according to the requirements of the use of selected types of pressure reducing valve and pressure regulator accuracy;

2, and then select the maximum diameter of the output flow path. When determining the air pressure of the valve, it should be greater than the maximum output pressure 0.1MPa. Valve import pump industrial washing machine

3, the pressure relief valve is generally installed in the water after the filter, mist eliminator or setter before, and be careful not to import, export reversed;

4, the valve should not be used when the knob to relax, so often deformed diaphragm and affect its performance.

This article Keywords: valve

Arc Toothed Rubber Timing Belt

Industrial synchronous belt applies the superior synthetic neoprene imported
from Japan as main raw material. It matches with multiple auxiliary materials with
various uses. Skeleton uses the superior glass fiber cord imported from japan. Tooth
face of the belt adopts nylon 66 high spandex for protection.
Synchronous belt drive is a novel drive mode that utilizes pulley gear meshing to
transfer motive power. It has accurate synchronous drive function. It needs no
lubrication without slip differential nor pollution and with little noise. Drive efficiency
reaches to 0.98. Speed ratio range can fulfill 1:10. Allowable linear speed can attain
50m/s. Drive efficiency ranges from several hundred watts to several kilowatts. It
suits multi-axial drive. It features as fine dynamic flex resistance, good anti-cracking
properties, superior ozone-proof performanca, sound heat-resistance and wearability etc.

Arc Toothed Rubber Timing Belt,Coated Timing Belts,Rubber Flat Belt,Rubber Conveyor Belt

Jiangsu Bailite Transmission Technology Co., Ltd , https://www.bailitebelt.com