Quartzite sedimentary ore magnet belonging metamorphic deposits, widely used at home and abroad magnetic sorting method of this type of ore, the ore type referred to in Anshan of lean magnetite, taconite referred abroad, magnet quartz rocks, minerals plays an important role in this type of iron ore resources, is the main target magnetic separation.
The magnetite quartzite beneficiation process is characterized by a stage magnetic separation stage grinding process, which can discharge monomer gangue at a stage and reduce the amount of grinding in the next stage.
The magnetic separation equipment mostly adopts a cylindrical magnetic separator, and the bottom groove is a reverse flow type and a semi-reverse flow type. There are also examples of dewatering using magnetic dewatering tanks at home and abroad.
The following is an introduction to the Dashihe Iron Ore Concentrator of Capital Iron and Steel Company.
The Dashihe Iron Ore Dressing Plant is the main raw material base of the Capital Iron and Steel Company and is located in Qian'an County, Hebei Province. The Dashihe iron ore belongs to the Anshan-type lean magnetite, and the rock strata that constitute each ore body belong to the pre-Sinian gneiss and have a strip-like and patch-like structure. Various types of stone are widely developed between the ore bodies and within the ore body. About 15% of the waste rock is mixed in the mining process, the ore is depleted seriously, the geological grade is 30.18%, and the ore grade is only about 25%.
Metal ore minerals are magnetite, followed by a small amount of hematite and martite; gangue minerals quartz, followed by the pyroxene, hornblende, less harmful impurities.
The symbiotic form of magnetite and gangue is simple and easy to dissociate. The magnetite inlay has a coarse and uniform particle size. The crystal grains having a crystal grain size of 0.062 to 0.5 mm account for 60% to 70%, 0.5 to 2 mm for 10% to 20%, and the content of 0.062 mm or less accounts for about 10%. Hematite has a finer particle size. The granitic mineral crystal grain size is also relatively coarse, ranging from 0.18 to 0.35 mm. When the ore is ground to -200 mesh and accounts for 75% to 80%, the useful minerals and gangues basically reach the monomer dissociation.
The results of multiple analysis of ore chemistry are shown in the table.

   Multiple analysis results of Dashihe iron ore chemistry

 

Fet

FeO

SiO 2

Al 2 O 3

CaO

MgO

P

S

No. 1 ore sample

29.9

11.18

47.2

0.75

1.24

2.19

0.038

0.02

No. 2 ore sample

30.73

10.99

47.92

0.73

0.58

1.91

0.025

0.16

The process uses a stage grinding-weak magnetic separation process, as shown in the figure below. First, the ball mill is pre-selected with a magnetic pulley. Before the grinding, the waste rock with a yield of 8% and a grade of about 9% can be discarded, so that the grade of the milled product can be increased by 2%, and the magnetic iron recovery rate is 99%. The second stage of the first-stage magnetic separation concentrate is subjected to secondary classification, secondary grinding, and secondary magnetic separation. After fine screening, the sieve is returned to the second-stage ball mill. The particle size of the three-stage magnetic separation is strictly controlled and improved. The monomer dissociation degree of minerals can increase the final grade of concentrate from 64% to 65% to 67% to 68.5%. The main technical indicators of the process are: 26.28% of the original ore grade, 68.42% of the concentrate grade, 6.41% of the tailings grade, and the recovery rate of 82.64%.



Dashihe Iron Ore Concentrator Production Process

Steel Structure

Tower Crane Steel Structure, regarded as the main parts of tower crane, refers to the tower crane jib, tower crane counter jib, tower head, tower crane Telescoping Cage, tower crane turning table,tower crane pull rod, tower crane Mast Section, tower crane Fixing Angle, ect. Steel Structure is made of steel, which fits the name.

Tower crane jib is a metal lattice structure of a normally triangular section, whose main mission is to provide the crane with the necessary radius or range. It is also called a jib. Like the mast, it usually has a modular structure to facilitate its transport.

The Anchorage Frame secures the tower crane mast to a structure or framework and provides stability when the tower crane is under load or experiencing wind forces.

Machinery arm also known as the counter jib, this houses the counterweights and pulleys that balance the crane.

The hook is the main load-bearing component that hauls loads. It is attached to a trolley that allows the hook to raise and lower, as well as move towards and away from the mast.




Telescoping Cage Jacking Cage,Crane Telescoping Cage,Tower Crane Jacking Cage,Climbing Cage,Tower Crane Yoke

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com