hot dipped galvanized welded rock cage
Welded gabions are
wire mesh containers welded with high quality steel mesh.They can be
filled on site with hard durable stone materials to form mass gravity
retaining structures. Owing to their inflexibility, welded gabion can
not adapt to differential settlement or be used in water courses ,In
comparison with woven wire gabions, welded gabion offer a higher
strength. In order to meet different project requirements, various wire
diameters and unit sizes are available for welded gabion. It is composed
of Welded Mesh panel and spring steel lacing wire.
As
a highly-accomplished wire mesh exporter, Kingdelong was established
jointly by China and South Korea in 1986, Our strategic location in
Anping County,Hebei province is only 300KM away from Beijing and
Tianjin, which offers us very competitive advantages both in trade and
logistics. Through two decades of hard work, Kingdelong company had
evolved into one of China`s largest wire mesh manufacturing
companies,Covering an area of over 200,000㎡, certificated by ISO 9001
& ISO 14001,as well as more than 450 diversified production
machines, which are either imported from foreign countries or developed
in-house.Wire mesh products find applications in a wide range of
industries, from Pharmacy to petroleum and chemical to textile. Welded Gabion Mesh,Welded Wire Mesh,Mesh Welded Gabion Wire,Gabion Retaining Wall Wire ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.apkdlwiremesh.com
1 The bottom protection screw is not loosened or not delivered to the place (generally 3-4mm,) ※The common 2 sample holder is not placed well 3 The environment has an effect 2. The lamp is off:
1 There is no æ‘ "head", (If you put the sample after the "æ‘", in the æ‘ test key, the heater will be bright) ※ The more common 2 sample weight must be greater than 0.5g.
3 Heater is not tightened and loose.
4 filament off.
Third, there is a large test error:
1 The amount of each sample should be consistent 2 Set the temperature to be consistent 3 The starting temperature of the test must be consistent 4 The sample is uniform.
5 Operating environment has an effect 6 Voltage is low (this is often more common and can be solved with a voltage regulator)
Fourth, the instrument does not have power:
1 plug is not plugged in 2 fuses burned. ※(caused by voltage instability, more common)
First, weighing instability occurs:
June 28, 2024