Electric bicycles have many advantages. They do not have exhaust gas and noise pollution like cars and motorcycles. They are low speed and easy to drive. Generally, as long as you can ride a bicycle, you can master the operation of electric bicycles in less than an hour, so it is especially suitable for women and women. Elderly use. Of course, there is no denying that electric bicycles do not directly pollute the environment. However, if the waste batteries are not handled well, it will cause great pollution to the environment just like car batteries. However, with the development of the battery industry and finding better disposal methods for waste batteries, electric bicycles will continue to develop.
The electrical part mainly includes four major electrical parts (motor, controller, charger, battery) and various electrical auxiliary functional components (such as converters, flashers, lamps, horns, cables, and speed control brake handles).
Electric Bike For Kids,Electric Bicycle,Electric Mountain Bike,Folding Electric Bike Shenzhen Qingmai Bicycle Co.,Ltd , https://www.qmwheel.com
1. At the end of each test, it is recommended to clean the salt spray chamber (including the laboratory, brine tank, pressure tank and sealed water tank) with clean water to keep the equipment clean.
2. In each test or at the end of the test, the solution in the measuring cup shall be drained and cleaned in time to avoid the accumulation of salt solution crystals and affect the calculation of the settlement amount.
3, when cleaning the cabinet, please note:
(1) After each test, the oil and water filter switch should be turned on to dilute the greasy water.
(2) If the test is not conducted for a long time, the water of the saturator should be radiated, and the saturator's water should be replaced regularly during normal use.
(3) The air regulator valve periodically checks its function.
(4) When it is not used for a long period of time, it should be restarted and tested, and all electrical systems should be inspected.
(5) After the test is completed, the inside of the box should be cleaned to make the box as dry as possible.
(6) If the electrical components on the control panel need to be exchanged in the event of a fault, do not disassemble the components themselves to ensure the service life of the test chamber.
(7) The nozzle is found to be clogged, the nozzle can be removed, cleaned with alcohol, xylene or 1:1 hydrochloric acid, or dredged with ultrafine steel wire, but the surface finish of the inner cavity of the nozzle hole must not be damaged so as not to affect the quality of the spray.
Salt spray test chamber cleaning method? By summing up the engineers of Shanghai Daida, I believe that users should know how to clean the salt spray test chamber. If there are other questions, they can contact Haida engineers at any time.
Smart electric bicycles generally consist of plastic parts, iron parts, electrical parts and brake systems.
The plastic parts mainly include the car body, various plastic decorative parts and rear fenders.
The iron parts mainly include frame, front fork, handlebar, rear hanger, saddle, bottom axle, rear shock absorber and other standard parts such as flywheel, chain, chain regulator and so on.
Salt spray test chamber cleaning method? Many salt spray test chamber users do not know how to clean, so this failure will always occur, and the service life of the salt spray test chamber will also be shortened. To this end, Haida engineers have made the following summary in order to solve this problem:
August 05, 2021