In the absence of power, it is necessary to create a device that relies on potential energy, including springs and gravity. For example, the white-light tracking sunlight mechanism of a solar receiver requires a device that is lightest in weight and can be accurately and automatically controlled. We use the alarm clock and the unconventional gear transmission box to make a clock-controlled transmission device, which is used to control the operation of the solar cooker. It is called the time control device. The time controller is used on the flat solar cooker. Technical identification confirms that it is a new mechanical transmission method. It consists of a drive gear driven gear belt and a solar receiver and alarm clock. The source of the cooktop torque is to add a weight that can move along the cooktop on both sides of the cooktop to change the magnitude of the rotational torque in the west direction, as the rotational power of the sun. Through the time controller, the rotation speed is controlled by the alarm clock, the transmission belt acts on the pulley and the rotation direction of the spring shaft is a tooth surface. The force analysis and the tooth surface angle determination are designed to apply the weight sliding on the inclined surface. The principle. One tooth of the driving gear is meshed with one tooth of the driven gear, and it is seen that a heavy object slides down on the inclined surface, and the tooth moves vertically downward, forcing the tooth to move in the horizontal direction. The normal reaction force and the maximum static friction force can be replaced by the full restraint reaction force. On the contrary, the alarm clock cannot be controlled, and the direction of the belt should be changed. The passive gear is composed of two pieces, the two teeth are the same, and the teeth are arranged together with each other, that is, one tooth peak is aligned with the tooth valley of the other piece and fixed on the shaft. The drive gear can use three standard cylindrical gears with the same parameters as the driven gear. The alarm clock corner is mounted in the gearbox. The size of the gear can be determined by the contour of the gearbox and the number of revolutions. The modulus can be determined by the size of the load. The thickness of each piece of the gear is smaller than the pitch to avoid toothing. We have made a standard cylindrical gear with a piece of teeth and a modulus. The driving gear reforming method cuts off one tooth every other tooth of the original gear to make a tooth and then mills a tooth surface angle on each tooth of the three gears to complete the gear processing. When the torque magnification is determined, the flank angle can be calculated according to the formula or formula. The calculation of the ratio of the number of revolutions of the driving gear to the driven gear sets the number of teeth of the driving gear to the number of teeth of the driven gear. The driven gear speed is rotated by one tooth per two-toothed moving gear of the driven gear, and the driving gear removes one tooth every other tooth, so the number of teeth of the upper moving gear is doubled.

Wood Bearing Block

Wood Bearing Block

1. Model Number/Series: Z41561, AZ31217, AZ42249 and many other kinds
2. Dimension/Size: From small one to large one according to your requested dimensions.
3. Working Condition: For combine harvesters, mowers, rakes, balers, Tractors, Trucks and Agricultural Use
4. Colour: original wood colour.
5. Material: scotch pine/radiata pine/red oak.
6. Packing: Neutral Cartons and pallets for free fumigation if there is no special requirements. But it is available to provide colourful package according to your design or we make design for your brand if required.
7. Certificate: CE and ISO9001, Alibaba Trading Assessment
8. Place of Origin: Ningbo Zhejiang
9. Function: as a block to fix bearingm and reduce the corrosion from friction
10. Feature/ characteristic: wood material can reduce the corrosion from friction. Good quality with competitive price

Wood Bricks, Wood Bearing, Wooden Blocks, Wood Bearing Block

Ningbo Combine Machinery Co.,Ltd. , https://www.combine-harvester-parts.com

August 29, 2021