Stapler machine

Stapler box machine is one of the post processing equipments of the carton. Its principle is the same as the principle of the ordinary stapler, except that the nail box machine uses the tiger tooth as the backing plate and is specially used for the carton sealing. The product is divided into two series, namely manual and pneumatic sealing machines. This series of products are lightweight, easy to operate, wear resistance, smooth sealing, safe and strong, and can reduce labor intensity and improve work efficiency, etc., are widely used in the need to load heavier items or easy to use adhesive tape sealing each Kind of carton and calcium plastic box sealing.

The working principle of the carton nailing machine is to put a cardboard in the binding part. The technical worker sets the binding pressure according to the thickness of the paperboard, and adjusts the width of the nail box supporting frame according to the length and thickness of the paperboard; when the paperboard thickness is too thick, it should be arranged. The staff will press the contracted office to the appropriate pressure so that the paper will not be crushed at the time of contracting. According to the requirements of the production notice, the box nail shall be nailed along the midline of the overlapped part and should not exceed 3 mm in skew. The nail pitch is even, the first and last nails are 20mm from the upper and lower lines, the single nail distance is not more than 55mm, and the double nail distance is not more than 75mm. The process leader and the team leader can each take a cardboard box and carry out the first inspection of the products. When checking, the cartons are placed under natural light. The main items to be noted are as follows:

Nails should be set firmly, set through, and there must be no phenomena such as stacked nails, missing nails, upturned nails, broken nails, curved nails, and no corners;

The two box blanks should be aligned when stapling the box. No scissors should appear.

After the box is folded and the box is resting, the difference between the two diagonals of the top surface of the carton with an overall size of less than or equal to 1000 mm shall not be greater than 3 mm, the overall deviation of the inner diameter of the single corrugated box shall not be greater than ±2 mm, and the size of the double corrugated box shall not be greater than ±4 mm. The difference between the two diagonals on the top surface of the carton with dimensions greater than 1000mm shall not be greater than 5mm and the overall deviation of the inner diameter of the single-carton carton shall be no more than ±3mm, and the double corrugated carton shall not exceed ±5mm.

Box corner hole diameter is not more than 4mm2, and there must be no obvious wrap angle, outside the flap from the seam or lap joint shall not be greater than 2mm.

Nail box should not appear inverted nail phenomenon, yin and yang face, species, specifications of two pieces of inconsistent box can not be wrong together carton nail box machine classification and its main parameters semi-automatic nail box machine, mechanical speed, nail distance, number of nails, nails Type, Minimum Paper Size, Maximum Paper Size, Total Horsepower, Mechanical Weight, Feed Table Push Stack Height, High Speed ​​Nailer, Maximum Size of Nail Box, Punch Speed, Nail Line Size, Motor Power, Weight, Dimensions