The compressor is the core component of the constant temperature and humidity test chamber and plays a direct role in the low temperature test. Therefore, the maintenance of the compressor is usually very important. According to the experience of Shanghai Linxun instrument in the ring test industry for many years, the following maintenance and repair suggestions are summarized:

1. Do not start the compressor frequently during the test. The interval between compressor start-up must be 15 minutes or more.

2. The voltage in the workplace must be stable. If the voltage is unstable, the current will be too large or too small. If it is operated in this kind of environment for a long time, it will cause great damage to the compressor. It is recommended to use a voltage regulator to connect the constant temperature constant. Wet test chamber

3. Ensure that the working environment is well-ventilated and free from dust. Keep the surface of the compressor clean. If you do not use the constant temperature and humidity test box for a long time, you should place the equipment in a space that is as clean as possible.

4 , constant temperature and humidity test chamber should be placed in compliance with the prescribed environment: temperature: 5 °C ~ 30 °C , humidity: ≤ 85%RH , pressure: 86 ~ 106kpa

5. There is proper maintenance space around the equipment, there is no strong electromagnetic radiation source in the vicinity, the ground is flat, and the ventilation is good. It does not contain flammable, explosive and corrosive gases.
If you do the above points, you basically master the maintenance of the compressor. It will ensure that your normal equipment operates and effectively extend the service life of the equipment.

Cone Crusher Parts

Cone Crusher Parts,Cone Crusher Liner,Cone Spare Parts For Crusher,Alloy Cone Spare Parts

ZHEJIANG FULE MINING MACHINERY CO., LTD , https://www.flmachines.com