In the summer sun, the temperature inside our car will increase, and it will spoil our paint. Therefore, everyone will buy a sunscreen to protect their car. But is it really okay to cover the car in the summer? It seems to everyone, it seems that cars can be owned or not, in fact, the use of clothing is still relatively large. The garments are made of sunscreen fabrics that can block or absorb some of the UV rays. Let me talk to you about the benefits of garments. First, garments can protect automotive paint and interior parts. In summer, the sun's exposure to paint is no doubt the same as using a knife to paint. In fact, stopping your car in a cool place can also protect the paint. However, dust, resin, and bird droppings may not be as good as you wish. In fact, the clothing is not only for sun protection, it can also prevent dust and soil sand, small dust particles into the car, the negative impact on the car parts can not be underestimated. Second, the garment can prevent the car from aging. Nothing could withstand the burning of the hot sun. Although there were glass and special materials outside the car to withstand the scorching sun, the temperature in the car was burned to 70 or 80 degrees by the summer sun. The normal temperature of the human body was 30 to 40 degrees. As soon as the temperature doubles, it is sure that the small parts inside the car will not be damaged under the burning of the hot sun, and the service life will certainly be greatly shortened. Third, the garment can also protect the wiper, protect the air conditioner and protect the engine. Although the garment is not a panacea, but the garment can indirectly protect these important auto parts, the temperature is the killer to damage the vehicle to shorten the life of the vehicle, but the garment can just control the temperature. Overall, the usefulness of garments in the summer can be very large. With the use of garments, it is possible to avoid prolonged exposure to ultraviolet rays, delaying the service life of the car, and avoiding the falling dust on the car and saving the car. The cost of cleaning. When everyone buys a garment, it is important to understand the material of the garment and to select and purchase it. Front Grill Part Injection Mould
In addition to beauty, the biggest role of the front grille is to intake and reduce air resistance. The greater the influence of the front grille on the resistance of the engine compartment, the engine compartment resistance accounts for about 10% of the total resistance, the active closing of the grille is conducive to reducing the resistance in the engine compartment. In addition, the front grille also plays a role in cooling The front grille is a passageway between the outside world and the engine compartment, through which air enters the engine compartment, taking heat from the radiator and cooling it.
The main function of the front grille is heat dissipation and air intake if the engine radiator water temperature is too high to fully dissipate by natural air intake, the fan will automatically start the auxiliary heat dissipation car running air is backward flow, fan airflow direction is backward, after heat dissipation, the air temperature rises from the rear of the engine cover near the windshield position And then the underside of the car, which is open, flows backwards, heat is released and then there's aerodynamic stroke resistance
Swift Front Grill,Car Grill Mesh,Front Grille,Jeep Front Grill Taizhou Huangyan Xingtai Plastic Mould Co., Ltd. , https://www.xingtaimould.com
April 14, 2023