Silicone Baby Teether,Silicone Bead Baby Teether,Silicone Mushroom Baby Teether,Soft Silicone Baby Teether Hubei Daxin Electronic Technology Co., LTD , https://www.nbaiwellgroup.com
When we set the ascent and descent of the lifting column, the time should not be too long. After the equipment is lifted into position, it must be ensured that the power is cut off, otherwise it will cause the motor to stall and be damaged. Lifting column lifting cannot be performed frequently in a short time to avoid problems due to overheating of the motor. When the equipment is unable to perform normal work or internal component damage, and the motor cannot be automatically powered off, the stop button should be manually pressed and promptly reported to prevent damage to the motor due to long-term operation.
Daily maintenance, regular inspections and maintenance of the lifting column equipment are the basis for ensuring that the equipment can be in a stable working efficiency.
When carrying out lift column equipment maintenance, we need to pay attention to the following aspects:
1 In the process of electrical maintenance, the relevant power supply should be cut off in time, and the maintenance, inspection and other signs should be hung in a prominent position;
2 The switch, button, indicator, buzzer, etc. need to be checked once a month.
3 The screws on each terminal and each electrical component must also be checked monthly to see if they are loose.
4 Regularly perform dust removal and maintenance operations on lifting column equipment surface, electrical control system and hydraulic control system;
5 Regular screw-fastening is required for the transmission mechanism of the equipment and the mechanical fixing mechanism.
When using the wireless remote control to perform lifting and lowering of the lifting column, the stop button can be used to stop the device when the operation is not completed. When using the distribution box button to control the lifting of the column, we can see the three buttons of rising, falling and stopping on the outer surface of the box. Use these buttons to achieve lifting and lowering operations of the lifting column. You can also use the stop button to stop the device when the action is not completed. When using the external button box to control the lifting of the column, the above button can be used to make the device go up and down. When the action is not completed, the stop button can be used to stop the work of the equipment.
The automatic lifting column also has an underground drive bay, this part is not visible, but it is indeed the heart of the automatic lifting column. An integrated micro-hydraulic system is arranged in it, which can directly and effectively drive the action of the lifting column.
October 29, 2024