Yongan electric forklift quality service, quality guaranteed

Yongan electric forklift quality service , quality guaranteed

Available functional status of Yongan Electric Forklift:  

    Select models and configurations according to operating conditions   The selection of models and configurations generally starts from the following aspects:

    ( 1 ) Operation function

    The basic operating functions of a forklift are horizontal transport, stacking / receiving, loading / removal, and picking. According to the business function to be achieved by the enterprise, it can be initially determined from the models described above. In addition, special work functions will affect the specific configuration of the forklift. For example, the paper is shipped with paper rolls, hot metal, etc. The forklift is required to install attachments to perform special functions.

    ( 2 ) Operation requirements

    The forklift's operation requirements include the general requirements for the pallet or cargo specification, the height of the lift, the width of the work channel, the grade of the slope, etc. At the same time, it is necessary to consider the operating efficiency (different models have different efficiency), work habits (such as customary driving or standing), etc. Aspects of the request.

  ( 3 ) Operating Environment

    If the cargo or warehouse environment that the company needs to transport is required for environmental protection such as noise or exhaust emissions, it should be taken into consideration when selecting models and configurations. The configuration of the forklift should also be cold storage or explosion proof if it is in a cold room or in an environment with explosion-proof requirements. Carefully examine the locations where the forklift needs to go through, and envisage possible questions that need to be answered. For example, whether the door height affects the forklift when entering or exiting the warehouse; when entering and exiting the elevator, the height and load of the lift affect the forklift; when working on the upstairs , whether the floor load meets the response requirements, and so on.

Yongan Electric Forklift Technical Parameters:

Appearance size (length × width × height ): 3200 × 1000 × 1800mm

Motor : 2000W

Hourly Speed : 15 — 18KM

Load : 1000KG

Weight : 1000KG

Voltage : 60V

Charging time : 10 - 12 hours

100 km power consumption : 8KW

Yong'an Electric Forklift Operating Procedures:

1 , to maintain the appropriate start-up speed, should not be too fierce.

2, to observe the voltage meter, if the voltage is below the limit, the truck should stop immediately.

3, the forklift during walking, the pulling direction is not allowed to change the travel direction switch, and electrical components to prevent burn gear damage.

4, travel and promotion should not be carried out simultaneously.

5 , pay attention to the drive system, the sound of the steering system is normal, abnormal noise should be promptly troubleshooting, non-sick operation is strictly prohibited.

6 , slow down in advance.

7, when working in poor road conditions, appropriate to reduce its important, and should reduce speed.

8, when the steep slope road carriage of goods, the degree of attention is firmly on the forks of the goods.

  Welcome all new and old customers to visit our factory! ! !

Address: North Section of Yong'an Road, Gongyi City, Henan Province

Phone: 0371-64390666

Mobile Phone: 15038270711

QQ : 475414141

Contact: Manager

Website: