Used Excavators,Used Hydraulic Excavator,Used Large Excavators,Old Excavator XCMG E-Commerce Inc. , https://www.usedmachinemkt.com
Definition:
Silane cross linking cable material pellets granulating machine is designed by using the building block principle, which can make the plastic extrusion machine changed according to the materials properties and process technology easily.
It is possible for one machine reach the extensive performance and special purpose in many place.
Silane cross linking cable material pellets granulating machine is popular also because its excellent dispersing and compounding as well good self-clean performance.
Â
Characteristics of product:
1.     High resistance to breakdown strength
2.     Low dielectric loss
3.     Good and stable insulation
4.     Good softness
5.     Good mechanical properties and electric properties
6.     Strong acid and alkali resistance, good chemical stability
Â
Application:
It is Suitable for the cable which is taking PE as raw material
Production line:
Introduction of ATS two-stage compounding line:
To produce PE cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.
Â
Characteristic of this production line:
Complete the plasticization, compounding and graft by big slenderness ratio co-rotating twin-screw extruder. Drop the temperature, build up the pressure, extrusion, pelletizing by low-speed single screw extruder. Using this technology can achieve more flexible operation, optimize technical condition and perfect product's performance than using one-stage extruder.
Â
About the pelletizing system:
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PE cable materials, we usually use the pelletizing system: water-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
Â
Production process:
1. Raw material storeÂ
2. Dryness hopperÂ
3. Molecular screen drierÂ
4. Raw material tankÂ
5. Loss-in-weight metering pumpÂ
6. Loss-in-weight electronic balanceÂ
7. Main twin-screw extruderÂ
8. Main single-screw extruderÂ
9. Water-ring pelletizer
10. Centrifugal hydro-extractorÂ
11. Boiling bedÂ
12. Vacuum feed mechanismÂ
13. Molecular screen drierÂ
14. Drying hopperÂ
15. Product hopperÂ
16. Vacuum packing machine
Â
Silane cross linking cable material pellets granulating machine have 4Â main types with different output which cover nearly all kinds of special and common application requirements of extruders.
We believe each type of extruder has its best application condition. You could select the extruder type according to your special demands.
Â
Â
Main technical specification
Machine size
Screw Diameter(mm)
Screw Speed Max.(rpm)
Motor Power(Kw)
Throughput Rate(Kg/h)
ATS52/120
ATE52
51.4
600
55
150-300
ASE120
120
85
37
ATS65/150
ATE52
62.4
600
90
300-500
ASE150
150
85
45
ATS75/180
ATE75
71
600
132
500-800
ASE180
180
85
55
ATS95/200
ATE95
93
600
250
800-1500
ASE200
200
85
75
Characteristics of this set of equipment:
1.     Good mixing effect and the temperature control is convenient
2.     Covers a small area and doesn't need large electricity
3.     Raw material mixing and granulating are entirely automatic, human demand is small
4.     High-safety and can reduce raw materials' damage and deterioration
Â
About our service:
PE Cable Extruder Before-sale Â
1.     Introduce products and applications detain
2.     Recommend suitable solution
3.     Provide with reference information
4.     Offer lab for test   Â
Â
During Manufacturing         Â
1.     Provide with layout and engineering conditions
2.     Inform the project processing status
3.     Offer other documents
Â
After-sale
1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information
Â
Why choose us
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Definition:
Silane cross linking cable material pellets granulating machine is designed by using the building block principle, which can make the plastic extrusion machine changed according to the materials properties and process technology easily.
It is possible for one machine reach the extensive performance and special purpose in many place.
Silane cross linking cable material pellets granulating machine is popular also because its excellent dispersing and compounding as well good self-clean performance.
Â
Characteristics of product:
1.     High resistance to breakdown strength
2.     Low dielectric loss
3.     Good and stable insulation
4.     Good softness
5.     Good mechanical properties and electric properties
6.     Strong acid and alkali resistance, good chemical stability
Â
Application:
It is Suitable for the cable which is taking PE as raw material
Production line:
Introduction of ATS two-stage compounding line:
To produce PE cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.
Â
Characteristic of this production line:
Complete the plasticization, compounding and graft by big slenderness ratio co-rotating twin-screw extruder. Drop the temperature, build up the pressure, extrusion, pelletizing by low-speed single screw extruder. Using this technology can achieve more flexible operation, optimize technical condition and perfect product's performance than using one-stage extruder.
Â
About the pelletizing system:
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PE cable materials, we usually use the pelletizing system: water-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
Â
Production process:
1. Raw material storeÂ
2. Dryness hopperÂ
3. Molecular screen drierÂ
4. Raw material tankÂ
5. Loss-in-weight metering pumpÂ
6. Loss-in-weight electronic balanceÂ
7. Main twin-screw extruderÂ
8. Main single-screw extruderÂ
9. Water-ring pelletizer
10. Centrifugal hydro-extractorÂ
11. Boiling bedÂ
12. Vacuum feed mechanismÂ
13. Molecular screen drierÂ
14. Drying hopperÂ
15. Product hopperÂ
16. Vacuum packing machine
Â
Silane cross linking cable material pellets granulating machine have 4Â main types with different output which cover nearly all kinds of special and common application requirements of extruders.
We believe each type of extruder has its best application condition. You could select the extruder type according to your special demands.
Â
Â
Main technical specification
Machine size
Screw Diameter(mm)
Screw Speed Max.(rpm)
Motor Power(Kw)
Throughput Rate(Kg/h)
ATS52/120
ATE52
51.4
600
55
150-300
ASE120
120
85
37
ATS65/150
ATE52
62.4
600
90
300-500
ASE150
150
85
45
ATS75/180
ATE75
71
600
132
500-800
ASE180
180
85
55
ATS95/200
ATE95
93
600
250
800-1500
ASE200
200
85
75
Characteristics of this set of equipment:
1.     Good mixing effect and the temperature control is convenient
2.     Covers a small area and doesn't need large electricity
3.     Raw material mixing and granulating are entirely automatic, human demand is small
4.     High-safety and can reduce raw materials' damage and deterioration
Â
About our service:
PE Cable Extruder Before-sale Â
1.     Introduce products and applications detain
2.     Recommend suitable solution
3.     Provide with reference information
4.     Offer lab for test   Â
Â
During Manufacturing         Â
1.     Provide with layout and engineering conditions
2.     Inform the project processing status
3.     Offer other documents
Â
After-sale
1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information
Â
Why choose us
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB, Schneider, Ls, Omron, or Customized
Pelletizing Type: Water-Ring Pelletizer
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB, Schneider, Ls, Omron, or Customized
Pelletizing Type: Water-Ring Pelletizer
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
800-1500kg/H Twin Screw Extruder for Silane Cross Linking Compounding
800-1500kg/H Twin Screw Extruder for Silane Cross Linking Compounding
April 18, 2024