Brick Making Machine for South Asia

 
Vacuum Extruder equipment is mainly used for extrusion of various brick types made of clay,shale,coal gangue,fly ash as raw material.it can also be used for extrusion of high-end building materials like fiber cement panels,split brick,tile and ceramic pipe etc.
 
Introduced from KWS company of Germany,and receives the permission to produce in china with GFK trademark according to German standard.
 
This serial equipment is well-made with compact structure,good forming performance ,high production efficiency,low power consumption, under the same extrusion pressure and production situation,it saves 20% of energy comparing with common vacuum extruder.

Brick making progress introduction




Company & Service Introduction 

1.We majors in the abroad & home fired-brick designing, kiln designing, factory building designing and turn-key project.
2.We have many professional specialists, among which 6 are professor-level engineer and 10 are of high title. 
3.We have accomplished over 50 brick projects of engineering, trading, technical support in Asia, Africa and South American countries.
4.We have also successfully constructed over 20 production lines in China.
Before-sale services:
(1) Tell customer how to build a brick plant, the complete plant including three parts, brick shaping machinery, drying and firing.(Confirm clay,power electricity,water,land area, fund)
 
(2) Guide customers to choose the best and economic plant, recover the investment within short time.
 
(3) site inspection
 
(4) We are responsible for the offer, flow chart, and detail specification of each machinery.
 
In-Sale services:
 
(1)Quality control must be inspected strictly
 
(2)In accordance with the agreements stipulated in the contract
 
After-sale services:
(1) We will send the technicians to guide with device installation, debugging and training operators until customers are fully satisfied.
 
(2) Guarantee for machinery, materials and equipment supplied under this quotation are valid for a period of 12 months after commissioning or 16 months after delivery whichever is earlier. Warranty shall cover manufacturing defect in material and workmanship but exclude:
1. Daily wear and tear 2.mishandling or improper operation3. Incoming power supply fluctuation
4. Consumable and spare parts.
 
(3) Regular visit customer, consult with the customer feedback, come true with the customer's two-way communication.



Company Introduction 

Thick Sheet Vacuum Forming Machine

Vacuum forming is a manufacturing process by which a sheet of plastic is heated and pressed over a form to create a part. This process is used to create many of the products in your home such as plastic containers, tubs, sink units, and electrical enclosures.

Thick sheet Vacuum Forming Machine is main for 2-10mm of material

if less 5mm ,then could with single heating to do.

More than 5mm ,by two later heating system to heating ,then increase blow function ,products will be more better

Plastic Vacuum Forming Machine,Thick Sheet Vacuum Forming Machine,Thick Sheet Thermoforming Machine,Thick Sheet Vacuum Plastic Forming Machine

Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wfengmachinery.com