CNC lathe CNC lathe debugging and maintenance Machine debugging machine in place, according to the customer specified location, place put put put. Machine mat pad, the machine wipe clean, adjust the level. To the machine hydraulic oil tank, lubricating oil tank, rail marked with the appropriate amount of oil and oil, to the machine water tank plus cutting coolant. Press machine rated power, install the appropriate power supply, and install the regulator and machine ground. Debug the positive and negative machine spindle, check the machine tool switch button and the function is normal. Precautions for Use Machine operators must be formally trained and qualified personnel, machine tool operators use the machine, be sure to look at the familiar machine operating instructions and understand the contents of which can operate the machine. Check the electrical cabinet door is closed, lubricants, coolant is sufficient, there should be no foreign bodies on and around the machine, hinder the movement of machine tools. Before operating the machine tool, please carefully check the input data to ensure that the specified feed speed is consistent with the operation of the machine. If incorrect data is used or the operation is not performed at the correct speed, the machine may malfunction. Causing damage to the workpiece or the machine itself or causing personal injury. Before machining parts, we must first check the normal operation of the machine, the machine does not work on the workpiece and equipment check the correct operation of the machine. When using the tool compensation function, carefully check the compensation direction and compensation amount, operate the machine tool with incorrect data, and the machine tool may malfunction, which may cause personal injury to the workpiece or the machine itself. When operating the machine manually, confirm the current position of the tool and the workpiece and ensure that the axis of motion, the direction and the feedrate are correctly specified. When the handwheel is fed, rotate the handwheel at a large magnification to move the tool and workbench rapidly, which may cause the handwheel to stop rotating while the tool and workbench will not stop immediately. Large-scale handwheel movement may cause damage to the tool or machine and even cause personal injury. If the machine can not be ruled out, please contact the machine tool supplier. Machine maintenance often check the adequacy of lubricants, plumbing is blocked, the degree of lubrication of lubricants and coolant, whether to be replaced. Turret rotation is smooth, whether the tool installation and removal of interference, the tip is damaged; Tail cone hole whether there is dirt, the cone is damaged. Regularly check X, Z two-axis movement is smooth, regular cleaning X, Z's travel switch, in order to avoid oil and water and dust, affecting the use. Periodically wipe the appearance of the machine, such as the operation panel, system monitor; regularly check the electrical cabinet and electrical cabinet into the line at the dust, there are rubs. Regularly check the electrical cabinet strong disk, servo unit, the spindle unit whether there is dust, there is power in the case of brush or vacuum cleaner. Regular inspection Check the spindle fan is rotating, whether there is debris, there are cleared, so as not to affect the spindle operation. Regular inspection Check the relay action on the strong plate is normal, if necessary, replace. If the system displays the battery alarm, it should promptly contact with the machine tool manufacturers, timely replacement.
Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.
The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.
A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.
The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.
Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com
ã€Print】 ã€Close】
April 01, 2024