Container Panel Making Machinery Car Panel Roll Forming Machine

machinery :container panel making machine car panel roll forming machine

The specification of Botou Manufacturers Car Panel Making Machine
 

Components of Machine 1.Automatic hydraulic uncoiler(according the machine and your requirement); 2.Entry Bench; 3.Feeding Section with guide; 4.Main forming machine; 5.PLC control system; 6.Cutting blade; 7.Product Rack; 8.Pressing device;

Product show




 

Features

• Cutter Material: Cr12MoV1 mould steel with heat treatmen; 
• Shaft Material: 45# mould steel with heat treatment;
• Roller Material: 45# mould steel with heat treatment, hard Chrome Coated;
• Have fashionable, nice appearance and durable;
• Payment Term: 30% deposit and balance before delivery;
• Widely used in various industrial factory, villa building, civilian building, warehouse, etc.

 

FAQ
Q:How is this machine's service life?

A:In the normal maintenance,the service life at least 8 years.

 

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,

replace the hydraulic oil every 1-2 years.

 

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,

if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.

if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

 

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.

 

Q:Mr.Alan,can you make the machine according to my design or proto type? 
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

 

Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.

 Contact me
 

Tower Crane Gear

Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are connected with two motor shaft repectively, which are connected with 99 teeth gear. The speed is reduced by the transmission of gears.

A bevel gear is a type of gear that has teeth cut on a conical surface. It is commonly used in tower cranes to transmit power between the vertical and horizontal shafts.
In a tower crane, the bevel gear is typically used to change the direction of rotation. The vertical shaft, which is connected to the motor, rotates vertically, while the horizontal shaft, which is connected to the crane's boom, rotates horizontally.
The bevel gear consists of two gears with intersecting axes. The teeth on the gears are cut at an angle, allowing them to mesh smoothly and transmit power. The gear ratio of the bevel gear determines the speed and torque of the rotation.
The bevel gear in a tower crane is designed to withstand heavy loads and provide efficient power transmission. It is usually made of high-strength steel to ensure durability and reliability in demanding crane operations.
Overall, the bevel gear plays a crucial role in the functioning of a tower crane by enabling the transfer of power and changing the direction of rotation between the vertical and horizontal shafts.

Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com