Electric Sightseeing Vehicle Battery Charging Method: 1. The battery of the electric sightseeing bus must be guaranteed to be full on the same day after it is used. The battery of the electric sightseeing bus is charged after 10-15km in general, if the battery is left unused for a long time. It is still necessary to charge regularly. 2. The battery of an electric sightseeing car cannot always perform deep discharge, but it can be deeply discharged occasionally. If after a relatively long distance driving until the undervoltage indicator flashes out of power, then we are filling the battery. This is a good understanding of the battery's current capacity level. 3, electric sightseeing car can not be stored loss, loss of electricity storage is very easy to affect the battery life, if the battery is not used for a long time, the battery will also appear damaged. 4. The battery of the electric sightseeing bus must be regularly checked for safety within a certain period of time. The new electric sightseeing bus should check the battery after it has traveled continuously for 50km. When it is more than ten kilometers, it can be used. The multimeter is used to check the voltage value of the battery external terminal. Generally, it should be between 39-42 volts after the full charge is downloaded. If it is less than this normal value, or the other battery in the opened battery box, The voltage is less than 10.5 volts, then it may be a short circuit in its internal single cell, this situation should be timely to the maintenance station for repair or replacement, so as not to damage the other two together Normal battery. In addition, everyone should still check whether the charger has malfunctioned. 5. If the design weight of the electric sightseeing car is within 500Kg, then it is necessary to avoid loading too heavy materials, and it is also necessary to avoid frequent uphill as well as starting. Because the current loss of the motor at this time is relatively large, the battery will be discharged too quickly and the voltage will drop rapidly. The smaller the depth of discharge of the electric sightseeing car battery after each use, the longer the service life of the capacitor. Therefore, a good reduction in the discharge of large currents can extend the battery life of electric sightseeing vehicles , and it can also increase certain mileage. In addition, regardless of the battery capacity of the battery pack, everyone needs to develop a good habit of using with charging. (Text / Sun Ni)
CNC flame / plasma / laser Cutting Machine is a computer control, precision mechanical transmission technology combined with high efficiency, high precision, high reliability of the thermal Cutting Equipment, it applies to shipbuilding, boilers, electromechanical vehicles, steel, In the petrochemical industry, coal, port machinery, military and other manufacturing industries high-precision steel plate hot cutting of new automation equipment. The machine consists of host, rail parts, gas system, electrical control, machine foundation and other components, the use of bilateral cargo side of the door-driven structure.
GJ3015 CNC Fiber Laser Cutting Machine
CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.
Technical specifications
Effective cutting length: 3000mm
Effective cutting width: 1500mm
Max. speed: 10000mm/min(returning speed)
CNC system: FSCUT
Laser generator: RFL-1000(Domestic sharp branch)
Smoke purification device: CCQ-9000(Wuxi Hulian)
Cutting torch: 1group( Cyplite )
Torch THC: BCS100,elevating distance≥100mm
Cutting Machinery,Cutting Machine,Cutting Equipment,Cutting Robot SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com
September 14, 2019