During the winter and night hours, there are often heavy fogs. The safety factor of driving a dump truck on a foggy day will fall. Fog visibility is very unsightly, especially if the vehicle is driven in dense fog, the driver still needs to drive carefully. As a common dump truck for transporting goods, there are many road conditions that are normally encountered, and there are also many cases of rapid uphill and downhill slopes. However, driving a dump truck in dense fog in winter is a lot of inconvenience. At that time, the effective visibility is very low, and the surrounding environment is not very good. Although it is a bit like a fairyland feeling, but Careless driving, resulting in a traffic accident, will become hell. It is an era when people have many cars and cars, and the traffic conditions are not as good as they used to be. There are more and more accidental traffic accidents. There are countless casualty accidents and losses. Therefore, every dump truck driver must be safety first. When entering the uphill and downhill sections, it is necessary to control the speed of the dump truck because the visibility in fog is low. In addition, the temperature in the winter is also low, and the ground will be more slippery. This will greatly affect the Increased the difficulty of driving the dump truck driver. If it is accelerated on the upslope and downhill sections, and because the brakes of other vehicles have malfunctioned, the accidents caused are unpredictable. To drive a dump truck in fog, it is necessary to control the speed of the vehicle in a safe range. Observe the surrounding road conditions from time to time, and at the same time, master the excellent timing of stepping on the brakes of the dump truck. Don't be overtaking, changing lanes, emergency braking, etc. It is best to clearly understand the weather before the advent of the weather. When encountering severe fog, try not to drive a dump truck. The money is valuable and life is priceless! Our steel poles are made from quality sheet through bending,
forming, automatic welding and hot galvanization. We can reach one-run
machining length of 14m and can bend sheet of thickness up to 45mm. We
adopt advanced welding procedures, automatically weld main joints and
reach rank-II welding quality. We
have got 500kV Transmission Line Tubular Tower Quality Certificate from Power
Industry Steel Tower Qualified Inspection & Test Center from 2009
year.
Transmission Line Steel Tubular Tower Transmission Line Steel Tubular Tower, Transmission Line Tower, Steel Tubular Tower, Mono Steel Tower Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com
September 24, 2019