How much is a sewage suction truck?

Sewage suction truck is a specialized vehicle for the collection of sewage, sludge and other environmental protection. It has the ability of self-priming and self-discharging. It has a large suction capacity and can quickly sewer the sewage and other places to clean and reduce people's labor capacity. The indispensable equipment for modern people. For those who need to buy a sewer truck, it is certain that they want to know how much a sewer truck is worth , for example, how much is a sewer truck?

Sewage suction car prices: 20,000 yuan each, 14,500 yuan, 129,000 yuan, 88,000 yuan, etc., according to the specific tonnage, configuration, brand, size, sewage treatment capacity and other factors, the price will be different. When it is necessary to purchase a sewage suction truck, you can make a detailed understanding of its price in advance.

There are several aspects to using a sewer truck:

First, the vacuum pump operating speed to maintain balance, if the speed is too fast too fast, it may cause the rotor to heat too fast; if the speed is too low, it may cause impact on parts and transport, resulting in shortened life.

Second, the unloading tank should be on the flat ground. If the tipping tank is carried out on a sloped or uneven ground, it may cause parts to malfunction and cause rollover accidents.

Third, since the unloading tank to loosen the bolt, then open the rear tank door opened to a certain angle, be sure to determine the rear tank door opened and then rise the tank, or will also roll over.

Fourth, the fuel pump and vacuum pump need to be in stop phase when the sewage suction truck is running.

Fifth, it is best to suction the liquid suction vehicle, such as inhalation of solids, the volume can not exceed the diameter of the hose; suction truck can not transport dangerous liquids, waste oil and so on.

6. When entering the sewage suction truck for maintenance, it must be ensured that the vehicle is lifted from the unloading tank, and it must be fixed with support rods and safety stoppers.

7. Sewage suction trucks should be driven slowly in the process of transportation. The speed can't be too fast, and they can't be braked quickly and make sharp turns.

How much is a sewage suction truck ? Buying a sewage suction truck is just like buying a car. According to the individual's economic situation and needs, it is more practical to buy sewage suction trucks with different price points.

Roof And Wall Panel Roll Forming Machine  is the special equipment for continuous rolling and cold-forming on steel sheet.

It adopts PPGI,GI,AL-ZINC as the raw material, decoiling the coil, continuous rolling and cold-forming, automatically cut to the size and output the finished panel. 

A Roof And Wall Panel Roll Forming Machine  is designed to produce roof panels, roofing step tiles and wall cladding sheets with different models, like IBR roofing sheets, corrugated roofing sheets, trapezoidal roof panels, IDT roofing sheets, Russian type 1100 metal step tiles, klip-lok 406 and klip-lok 700, KR18/KR24 standing seam roofing, BEMO roof sheets, and concealed fixing roofing sheets etc.

The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realizes the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure. 

Advantages of Roof And Wall Panel Roll Forming Machine

5. Producing speed can reach to 15-20m/min

Technical parameters of Roof And Wall Panel Roll Forming Machine

· Uncoiler: Manual uncoiler

· Inner diameter: 480-520mm

· Outer diameter: 1250mm.

· Loading weight 5TONS

· Rotation: Pulled by main roll forming machine

· Expansion: Manually

· Forming speed: 0-12m/min.

· Forming stations: 14-18 stations

· Machine base: welded with 36 # H beam-

· Material of Shafts 45# high quality steel

· Diameter of Shafts 70mm

· Material of Roller high quality 45#steel coated with hard chrome 0.05mm.

· Thickness of Siding Plate: 18mm

· Transmission by Chain-brackets

· Motor Power 5.5 KW

· Hydraulic Cutter of the roofing cladding sheet roll forming machine

· Material of blade Cr12 with quenched treatment 48-50.

· Hydraulic Powe 3 KW

· Cutting Length and Quantity Clients can set the required length and quantity on the PLC touch screen

· Control System of roofing cladding sheet roll forming machine

· Panasonic PLC Control, LCD screen, touch screen, frequency converter

· Voltage 380V/50HZ/3phase

· Automatically measure the length and quantity

Roof And Wall Panel Roll Forming Machine

Roof And Wall Panel Roll Forming Machine,Corrugated Steel Sheet,Metal Roof Wall Panel,Color Steel Forming Machine

Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com