In 2010, eight kinds of products in China's instrumentation showed an increasing trend

In 2010, China's machinery industry faced the most complicated international and domestic economic situation. Under the guidance of a series of correct measures of the country, the economic operation of the industry maintained a steady and rapid growth, and the major indicators of economic efficiency were in full swing. From the “restorative growth” to “restoration of growth” across the industry, some industries have achieved extraordinary development, and there has been a good momentum of technological advancement, independent innovation, and development of high-end equipment support industries.

According to the latest statistics, in 2010, the production and sales of the machinery industry achieved a growth of more than 30%, and reached a record high. The growth in production and sales of the construction machinery and machine tool industry was outstanding. The export delivery value showed a recovery growth, and the scale of import and export trade continued to expand. . In the monthly output of 119 kinds of major products of the China Machinery Industry Federation, the accumulated year-on-year increase accounted for 89.92% of all reported product varieties.

Production and sales show steady and rapid growth. After the total output value jumped to a new level of 10 trillion yuan for the first time in 2009, the total output value of the machinery industry hit a record high in 2010. The total industrial output value of the industry totaled 14,384,681 million yuan, a year-on-year increase of 33.93%. The growth rate increased by 17.86 percentage points over the same period of last year. Among them, the industrial output value for the month of December was 1,48.039 billion yuan, a record high. In 2010, the entire industry achieved a total sales value of 1,405,396 million yuan, an increase of 34.26% year-on-year, an increase of 18.15 percentage points over the same period of last year. Looking at the growth rate of production in various months of the year, although the growth rate of the production and sales of the machinery industry in the first 11 months of 2010 showed a monthly decline, the production growth rate in December was slightly higher than that in October and November. Steady and rapid growth. Due to the low growth rate of production and sales in the previous year, the growth rate of production in 2010 was a relatively high year in recent years.

The sales rate of machinery products in 2010 was 97.74%, which was 0.24 percentage points higher than the same period of the previous year, but slightly lower than the national industrial product sales rate (97.93%). Looking at the scale of different enterprises, the maximum sales rate of large-scale enterprises is 98.43%, which is 0.33 percentage points higher than that of the previous year, 97.51% for medium-sized enterprises, 0.26 percentage points higher than the previous year, and 97.48% for small-scale enterprises, which is 0.18 percentage points higher than the previous year. .

The growth of production in the engineering and machine tool industries highlights that the growth rate of production in the 12 industries of the machinery industry has been growing in 2010. There are 5 industries with growth rates higher than the industry average, followed by: construction machinery, machine tools, automobiles, mechanical parts and internal combustion engine Among them, the production of construction machinery and machine tool industry grew significantly, accumulatively increasing by 48.09% and 40.95% year-on-year, respectively, and the growth rate was more than 23% higher than the previous year. However, the growth rate of production in seven industries is lower than the industry average, which are agricultural machinery, instrumentation, cultural and office equipment, general petrochemical machinery, heavy mining machinery, electrical appliances, and food packaging machinery industries, with growth rates above 25%.

The rapid growth of the output value of new products The total output value of new products completed in 2010 was 272.513 trillion yuan, a year-on-year increase of 33.07%. The output value of new products showed rapid growth, but the output value of new products was the same as that of the previous year, which was 18.92%. From the perspective of various industries, the output rate of new products in the seven industries increased over the previous year, namely, construction machinery, instrumentation, cultural and office equipment, petrochemical general machinery, electrical appliances, mechanical basic parts, and food packaging machinery industries, while the new products in the automotive industry The output value rate has decreased from the previous year. However, from the perspective of contribution rate, the automotive industry contributed the most to the increase in the output value of new products, which was 52.14%; the electrical and electronic appliances industry took the second place, accounting for 19.95%; the construction machinery and petrochemical industry ranked third and fourth respectively.

The export delivery value showed a recovery growth. In 2010, the export delivery value of the entire industry reached 1.449380 trillion yuan, an increase of 34.32% year-on-year, an increase of 52.85 percentage points over the same period of the previous year (-18.53%), and the overall value of export delivery was increasing. Trends, but the growth rate is slowing month by month. At the same time, the value of export delivery fell by 0.13 percentage point from the previous year, of which the industries with larger declines were: heavy mining machinery, instrumentation, internal combustion engine and food packaging machinery industry, with a year-on-year decline of over 1 percentage point. The industry with the highest value of export delivery in 2010 was the cultural office industry, which reached 73.37%. The following are followed: instrumentation industry 18.99%, electrical appliances industry 14.26%, and petrochemical general industry 10.57%.

Nearly 90% of the main products achieved year-on-year growth in the 119 kinds of main products reported by the monthly Zhonghua Machine Co., with a cumulative increase of 107 products, which accounted for 89.92% of all reported products; 85 kinds, which accounted for 71.43% of all reported products, accumulated 11 kinds of products that decreased year-on-year, accounting for 9.24% of all reported products. Some of the product output has reached a new level. Details are as follows:

Under the influence of the national agricultural machinery subsidy policy, the output of major agricultural machinery products has grown rapidly, and large-scale tractors, on-site operating machinery, and food processing machinery have grown by more than 30%. In particular, grain processing machinery has grown rapidly, with a year-on-year increase of 50.88%. The year-on-year decline in agricultural machinery products was dedicated equipment for feed production, which fell by 4.26%.

The output of most products in the petrochemical GM industry has increased at different levels compared to the previous year. Products that have maintained growth above 30% include: special equipment for oil refining and chemical production, vacuum pumps, fans, gas compressors, compressors for refrigeration equipment, and oil drilling equipment. Plastic processing equipment and other products, of which oil drilling equipment grew significantly, an increase of 89%. However, the output of gas separation and liquefaction equipment, air pollution control equipment, solid waste treatment equipment, and noise and vibration control equipment decreased in different degrees, and fell by more than 12% year-on-year.

In 2010, excavation and shovel transportation machinery products maintained rapid growth, among which the excavator and loader grew faster, which was an increase of more than 45% year-on-year. Concrete machinery with a lower growth rate is also maintained at more than 9%.

Among the heavy machinery products listed in the monthly report, except for the metal rolling equipment, the other products all had different degrees of growth over the previous year, of which the faster-growing machines were conveyors, which increased by 37.82% year-on-year. Metal rolling equipment decreased by 3.18% year-on-year.

Among the 10 products in the monthly statistics of instrumentation and cultural office equipment industry, there are 8 kinds of products showing a growing trend. The fastest growing products in the instrumentation industry were automotive instrumentation, industrial automation instrumentation and control systems, and optical instruments, which increased by more than 25% year-on-year; environmental monitoring-specific instrumentation and analytical instruments and devices decreased by 1.78% and 1.79%, respectively. The number of cameras, digital cameras and offset offset printing equipment in the cultural and office industry all showed a year-on-year growth. The faster growth was for copying and offset printing equipment, which increased by 22.52% year-on-year.

In 2010, both metal Cutting Machine tools and metal forming machine tools maintained rapid growth with year-on-year growth of more than 18%. Among them, the number of CNC metal-cutting machine tools increased significantly, by 66.71% year-on-year, and the growth rate increased by 67.17 percentage points from the previous year. The year-on-year growth of CNC equipment continues to be more than doubled.

In 2010, the automotive industry continued to maintain rapid development with the support of national policies. The total production of automobiles was 18.2647 million units, an increase of 32.44% over the previous year. Among them, the growth rate of passenger cars was 28.17%, the growth rate of multi-purpose passenger cars was 79.89%, and sport utility vehicles were used. The number of cars increased by 103.38%, passenger cars increased by 29.93%, and trucks increased by 22.72%. Low-speed trucks changed their downward trend in the first 11 months, which was a year-on-year increase of 1.55%.

In 2010, the production of power generation equipment was 122.6421 million kilowatts, an increase of 4.6% year-on-year, an increase of 16.5 percentage points over the previous year. Judging from the classification of power generation equipment, the hydropower generating units decreased by 9.7% year-on-year, the growth rate decreased by 2.1 percentage points from the previous year, and the turbine generators increased by 1.4% year-on-year, an increase of 19.9 percentage points over the previous year. The output of new energy wind turbines maintained rapid growth, a year-on-year increase of 53.8%. In 2010, the growth of power transmission equipment was rapid, with transformers and power capacitors all growing at more than 27%, and low-voltage switchboards increased by 72.44% year-on-year.