KCB stainless steel gear pump disassembly should pay attention to what matters? The structure and design are the products introduced into the Soviet Union in the early 1950s. They have the characteristics of simple structure, practicality and easy maintenance.
1. Attention should be paid to the removal of KCB stainless steel gear pump:
1 Before disassembling, fully understand the structure and characteristics of disassembled parts and prevent them from being disassembled and damaged.
2 Disassemble and place in a reasonable order, especially multi-cylinder KCB type stainless steel gear pump. After the parts are dismantled and cleaned, KCB special pumps should be placed in a clean place in the order of the cylinders, and the numbers should be seated. Parts of each cylinder cannot be mixed.
3 Grasp the appropriate degree of dismantling, the demolition on the demolition, should not be demolished, do not disassemble.
4 Select the proper disassembly tool and do not disassemble it brutally.
5 Disassembly Prepare for future assembly.
2, KCB stainless steel gear pump assembly should pay attention to matters:
1 Piston rods are grouped by size. Pistons and cylinder liners, pistons and piston rings, piston pins and pin holes, connecting rods and bearing bushes, etc. shall be selected according to the size to ensure the technical requirements for cooperation.
2 The weight requirements of the piston connecting rod set. Multi-cylinder KCB stainless steel gear pumps have certain requirements for the weight of pistons, connecting rods, and piston connecting rods of the same model, and there are grouping marks. For example, the weight difference of the four pistons of the 495KCB type stainless steel gear pump is not greater than 8 grams. The weight difference of the four connecting rods of the same group is not more than 10 grams, and the weight difference of the piston connecting rod group is not more than 30 grams. In the assembly, the repairman shall install according to the mark. If there is no mark or unclear mark, the ZYB high-temperature gear oil pump is easy to use the balance weight, so that the weight difference between the piston and the connecting rod of each cylinder is as small as possible to facilitate the balance of the inertial force.
3 installation size requirements. S195KCB type stainless steel gear pump cylinder sleeve shoulder height above the plane value of the body is 0.04-0.17 mm; 495KCB stainless steel gear pump cylinder sleeve shoulder height above the plane value of the body is 0.02-0.10 mm. Multi-cylinder KCB type stainless steel gear pump cylinder sleeve shoulder high value should be consistent as much as possible, adjacent cylinder cylinder sleeve shoulder higher than the body plane value is not greater than 0.04 mm. It can improve the cylinder sealing performance and prevent the cylinder gasket from being damaged.
4 adjustment requirements. Such as fuel injector pressure and fuel supply adjustment requirements, the injector injection pressure of each cylinder as far as possible, the atomization state is consistent, the injection pressure difference is less than 5 kg/cm2, each cylinder rated oil supply requirements are uniform, not Uniformity is not more than 3%.

For more details about KCB stainless steel gear pump, please visit:

Suspended Platform

Suspended platform, as temporary suspended cradle platform, are widely applied in maintenance applications such as curtain fecade cleaning in high rise building, painting, glazing repairs, bill- board painting, cable installation and other outer working of high rise building up to 150 meters about 30 floors high. Our ZLP series suspended platform cradle, ZLP1000, ZLP800, ZLP630, ZLP500, ZLP400 and ZLP150, are good choices for fulfill above outside of wall work. Based on the different materials, the suspended platform could be divided into Aluminum Working Platform, steel Working Platform, galvanized Working Platform.

ZLP series temporarily installed suspended platform is an ideal access equipment for building facade construction, decoration, cleaning and maintenance. It can be also applied to other aerial working such as elevator installing, ship building, construction of dam, bridge, large chimney, etc.

This equipment is easy to operate, convenient to move and reliable in safety and much more efficient than traditional scaffolding.


Suspended Working Platform,Suspended Cradle Platform,Aluminum Working Platform,Suspended Construction Platform,Working Platform Cradle

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com