RuiRio pneumatic components Co., Ltd is a professional fitting factory. We provide top-class quality products.
feature:
1) Material of Fitting body:Â brass;
2) Release rings:Â round;
3) LOGO on ring: No LOGO;
4) Working Temperature: 0-80C
5) Working pressure: 0-20Bar
6) Fitting types available: Straight fitting, elbow connector, tee branch, bulkhead fitting, y type etc.
7) The fittings can work well even if you test fittings under 40bar within 5-10mins.
8) The fittings can work well even if you test under -20 degree to 80 degree within 3 hours. But normal working temperature is -10 degree to 60 degree.
9) we test the fitting one by one before we send to customer.
Application:
1. One Touch joints used in pneumatic piping
.
2. Used for a wide variety of models to meet all demands.
3. Easy to connect/disconnect tube by one touch.
4. PC Type is useful for piping in confined space, given its six-angle wrench processing inside.
5. Flexible for directional tube with its revolving construction of body (PL & PT Type)
6. Fitting is equipped with O-ring or Teflon coating on the thread.
Size ase below:
| 4-M5 | 4-01 | 4-02 | / | / |
| 6-M5 | 6-01 | 6-02 | 6-03 | 6-04 |
| 8-01 | 8-02 | 8-03 | 8-04 | / |
| 10-01 | 10-02 | 10-03 | 10-04 | / |
| 12-01 | 12-02 | 12-03 | 12-04 | / |
| 16-02 | 16-03 | 16-04 | 16-06 | / |
RuiRio pneumatic components Co., Ltd is a professional fitting factory. We provide top-class quality products.
feature:
1) Material of Fitting body:Â brass;
2) Release rings:Â round;
3) LOGO on ring: No LOGO;
4) Working Temperature: 0-80C
5) Working pressure: 0-20Bar
6) Fitting types available: Straight fitting, elbow connector, tee branch, bulkhead fitting, y type etc.
7) The fittings can work well even if you test fittings under 40bar within 5-10mins.
8) The fittings can work well even if you test under -20 degree to 80 degree within 3 hours. But normal working temperature is -10 degree to 60 degree.
9) we test the fitting one by one before we send to customer.
Application:
1. One Touch joints used in pneumatic piping
.
2. Used for a wide variety of models to meet all demands.
3. Easy to connect/disconnect tube by one touch.
4. PC Type is useful for piping in confined space, given its six-angle wrench processing inside.
5. Flexible for directional tube with its revolving construction of body (PL & PT Type)
6. Fitting is equipped with O-ring or Teflon coating on the thread.
Size ase below:
| 4-M5 | 4-01 | 4-02 | / | / |
| 6-M5 | 6-01 | 6-02 | 6-03 | 6-04 |
| 8-01 | 8-02 | 8-03 | 8-04 | / |
| 10-01 | 10-02 | 10-03 | 10-04 | / |
| 12-01 | 12-02 | 12-03 | 12-04 | / |
| 16-02 | 16-03 | 16-04 | 16-06 | / |
After use,stainless steel mesh element can be cleaned, please use a professional cleaning device. And note that the cleaning effect which is the left service life can not be calculated accurately
The W/HC stainless steel wire mesh element is widely used in pressure and return line filters
Filtration rating:
W/HC: 25, 50, 100, 200 µm
Size
0030,0060, 0110, 0140, 0160, 0240, 0260, 0280, 0330, 0500, 0660, 0990, 1320.
Available pressure stability:
W/HC:20 bar
COMPATIBILITY WITH HYDRAULIC FLUIDS ISO 2943
Hydraulic oil H to HLPD DIN 51524
Lubrication oil DIN 51517, API, ACEA, DIN 51515, ISO 6743
Compressor oil DIN 51506
Supplementary details
W=NBR seals, suitable for HFA and HFC emulsions
Oil Mist Filter Element,W/Hc Filter Element,High Pressure Filter Element,Air Separator Filter Element
Xinxiang Shengda Filtration Technique Co., Ltd. , http://www.shengdafiltration.com