Holography is divided into two processes which are recording and reproduction,the interference fringes is generated on the holographic plate through the superposition between the reference light and the reflected light during the recording. Then, after the holographic plate is processed in the darkroom, an image exactly same to the original object will be reproduced from the interference pattern on the photosensitive sheet by diffraction. Compared with ordinary photographic, Holography not only records the amplitude of light field of the object, but also records the relative phase of the reflected light waves. Holography is widely used in holographic microscopy, holographic security, data storage, deformation measurement, holographic interferometry and etc.
â– High reliability single longitudinal mode lasers ( coherence length >50m )
Wavelengths: 360nm, 405nm, 457nm, 473nm, 532nm, 556 nm, 561 nm, 589 nm, 633 nm, 656nm, 660nm, 671nm, 1064nm,
(1) Three-dimensional holographic photostimulation of the dendritic arbor
(J. Neural Eng. 8 046002; doi:10.1088/1741-2560/8/4/046002) (CNI-405nm)
(Optics and Lasers in Engineering Vol. 50, Issue 2, Pages 176–181) (CNI-532nm)
Holography Laser,Hologram Laser Projector,Uv Laser Pointer,Single Longitudinal Mode Laser Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com
There is no product quality control without process documentation, so it is not difficult to make a dryer, but it is not an easy task to do a dryer.
There are also many refrigeration dryers where the refrigeration system is blocked and the refrigeration compressor is stuck.
Anatomically, the dust oxide is trapped in the dry filter and in the compressor oil. After the 5S rectification and welding process specifications of the production line, such failures are greatly reduced.
Then there is the problem of virtual welding. After the machine was running for a period of time, it was discovered that the production and testing machines in the factory were all good. At present, most of the domestic cold-drying machine factories do not have this process.
Domestic refrigeration dryer manufacturers are not perfect in many processes, and this situation is improving, and there is still a long way to go.
Features
â– Easy to install and maintain. Relevant components can be provided
â– Customized solution can be provided upon request
Laser Related
1342nm, 1550nm, etc. Multi-wavelengths system is also available on request.
Interference fringes
Etalon interference ring
Wavelength and linewidth test
Accessories
Beam Shutter
Beam Expander
Wave Plate
Beam Splitter
Laser Goggles
Research achievement of CNI laser Optogenetics from customers
(2) Two-wavelength exposure enhancement in holographic data storage of spirooxazine-doped polymers
(Optics Communications Vol. 338, 1 March 2015, Pages 269–276) (CNI-405nm)
(3) Depth resolved hyperspectral imaging Spectrometer based on structured light illumination and Fourier
transform interferometry (Biomedical Optics Express, Vol. 5, Issue 10, pp. 3494-3507 (2014)) ( CNI-473nm)
(4) Optical magnetic imaging of living cells (Nature 496, 486–489 (25 April 2013)doi:10.1038/nature12072) (CNI- 532nm)
(5) Multi-Wavelength Laser sensor for intruder detection and discrimination
(6) Optical observation of shock waves and cavitation bubbles in high intensity laser-induced shock processes
(Applied Optics, Vol. 48, Issue 19, pp. 3671-3680 (2009)) (CNI-532nnm)
(7) Microscope spectrometer for light scattering investigations (Applied Optics, Vol. 49, Issue 22, pp. 4193-4201 (2010)) ( CNI-671nm/532nm)
Nowadays, customers pay more attention to the production process of products, so high-end refrigerated dryers often use production lines to conquer customers. A good product must not only be well-marketed, but also allow customers to be convinced in the production process and production management to truly build a brand.
October 18, 2024