Quick connector Fuel pipe line assembly Urea pipe line assembly/SCR Adblue tube assembly Pipeline end plug & auto plastic parts INTRODUCTION OF QUICK CONNECTOR 1) the design and production 2) Security of quick connector 4) Working environment of quick connector 5) Connect &disconnect peration method of quick connector Quick connector Fuel pipe line assembly Urea pipe line assembly/SCR Adblue tube assembly Pipeline end plug & auto plastic parts INTRODUCTION OF QUICK CONNECTOR 1) the design and production 2) Security of quick connector 4) Working environment of quick connector 5) Connect &disconnect peration method of quick connector
Elevator Door System Series,Elevator Door Header,Elevator Door Operator Controller,Elevator Glass Landing Door Suzhou Tailing Elevator Co.,ltd , http://www.sztl-elevator.com
Â
BUSINESS SCOPE
Innovative, secure and quick, Our quick connect fittings made of synthetic material are suitable for most media carrying lines. Be it fuel , oil vapor , water cooling and air carrying lines . We offer the idea means of connection. These quick connectors are specially suited to being matched up with the automotive pipe system.
The design and production of quick connector are strictly accord with SAE J2044-2009. Quick connect coupling specification for liquid fuel and vapor or emissions systems . If the product does not meet customer needs, we can design and manufacture according to customers requirements. Plug-in and sel-locking structure enables connect and disconnect more quick and easier. The space required for the operation is only the width of a finger on both sides. These features ensure quicker connector can be high-density arrangement and an increase in customer design flexibility.
Quick connector with double sealing rings radial sealing structure, modified rubber o-rings used, mainly for fluid The physics chemistry, custom, anti-aging, corrosion, and swelling; outer o-rings are separated by the intermediate spacer ring. Corresponding space on the two sealing ring, rubber substrate bonding does not occur, the outer synthetic rubber o-rings used, Increased mechanical properties. preventing air aging. Sealing ring and spacer ring through the outer ring of elastic clamping device securely fastened in Shell will not result in phenomena such as ring falls of, and shift. Great seal security is guaranteed.Â
3) Material Of Quick Connector
Parts
Material
Supplier
Application
Body
PA12 GF30
ARKEMA
EVONIK
Fuel
Â
PA66 GF30/35
BASF
DUPONT
Fuel Steam
Â
PA6/6T GF25
BASF
Â
HT Fuel
Â
PA9T GF30
KURARAY
Â
HT Fuel
Locking Spring
PA11
ARKEMA
Â
Fuel
Â
PA66
BASF
DUPONT
Fuel, Steam
Securing Ring
PA12 GF30
ARKEMA
EVONIK
Fuel,Steam,Urea,A/C , Â Â Â Â Â Â Â Â Â Power Steering System
Â
PA6/6T GF30
BASF
Â
HT Fuel
Â
PA66GF 30/35
BASF
Â
Fuel Steam
O Ring
FKM/FVMQ/
 HNBR/AEMHUTCHINS ON
GMORS
Fuel,Steam,Urea,A/C Â Â Â Â Â Â Â Â Â Â Power Steering System
Gasoline and diesel fuel delivery systems , Ethanol , methanol or natural gas delivery systems or their vapor venting or evaporative emission control systems
Working pressure
5bar (72psi)
Working pressure
in Vacuum-0.55bar (-7.2psi)
Working temperature
-40-115ºC ,  short time 150ºC
Quick connector is made up of body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube end piece inserts the connector , as locking spring has certain elasticity , Tie clip fastener to connect two connectors together ,and then pull back to assure complete connection.; Repair or remove the quick connector is difference . first advance push the male connector and press the clip button , lock expansion , you can easily pull out the connector ;please note,SAE 30th heavy oil lubrication should be used before Reseat
The Step of inserts the connector Â
The Step of inserts the connector Â
Â
Â
BUSINESS SCOPE
Innovative, secure and quick, Our quick connect fittings made of synthetic material are suitable for most media carrying lines. Be it fuel , oil vapor , water cooling and air carrying lines . We offer the idea means of connection. These quick connectors are specially suited to being matched up with the automotive pipe system.
The design and production of quick connector are strictly accord with SAE J2044-2009. Quick connect coupling specification for liquid fuel and vapor or emissions systems . If the product does not meet customer needs, we can design and manufacture according to customers requirements. Plug-in and sel-locking structure enables connect and disconnect more quick and easier. The space required for the operation is only the width of a finger on both sides. These features ensure quicker connector can be high-density arrangement and an increase in customer design flexibility.
Quick connector with double sealing rings radial sealing structure, modified rubber o-rings used, mainly for fluid The physics chemistry, custom, anti-aging, corrosion, and swelling; outer o-rings are separated by the intermediate spacer ring. Corresponding space on the two sealing ring, rubber substrate bonding does not occur, the outer synthetic rubber o-rings used, Increased mechanical properties. preventing air aging. Sealing ring and spacer ring through the outer ring of elastic clamping device securely fastened in Shell will not result in phenomena such as ring falls of, and shift. Great seal security is guaranteed.Â
3) Material Of Quick Connector
Parts
Material
Supplier
Application
Body
PA12 GF30
ARKEMA
EVONIK
Fuel
Â
PA66 GF30/35
BASF
DUPONT
Fuel Steam
Â
PA6/6T GF25
BASF
Â
HT Fuel
Â
PA9T GF30
KURARAY
Â
HT Fuel
Locking Spring
PA11
ARKEMA
Â
Fuel
Â
PA66
BASF
DUPONT
Fuel, Steam
Securing Ring
PA12 GF30
ARKEMA
EVONIK
Fuel,Steam,Urea,A/C , Â Â Â Â Â Â Â Â Â Power Steering System
Â
PA6/6T GF30
BASF
Â
HT Fuel
Â
PA66GF 30/35
BASF
Â
Fuel Steam
O Ring
FKM/FVMQ/
 HNBR/AEMHUTCHINS ON
GMORS
Fuel,Steam,Urea,A/C Â Â Â Â Â Â Â Â Â Â Power Steering System
Gasoline and diesel fuel delivery systems , Ethanol , methanol or natural gas delivery systems or their vapor venting or evaporative emission control systems
Working pressure
5bar (72psi)
Working pressure
in Vacuum-0.55bar (-7.2psi)
Working temperature
-40-115ºC ,  short time 150ºC
Quick connector is made up of body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube end piece inserts the connector , as locking spring has certain elasticity , Tie clip fastener to connect two connectors together ,and then pull back to assure complete connection.; Repair or remove the quick connector is difference . first advance push the male connector and press the clip button , lock expansion , you can easily pull out the connector ;please note,SAE 30th heavy oil lubrication should be used before Reseat
The Step of inserts the connector Â
The Step of inserts the connector Â
Â
VVVF Mitsubshi Doors,Openning and closing without noise. High accurately open and close sense with light curtain
Suzhou Tailing Elevator Co.,Ltd has been registered in Wujiang,Suzhou,China and established in 1998.It is a hightech elevator manufacture which integrate the manufacture,sales,installation,repair,maintenance,transformation into one.
At present,the company has 40,000 square meters of factory zones including 26,000 square meters of the manufacture area. .Meanwhile it invest in 125million RMB to build up over 40,000 square meters of new factory workshop.The total area reach above 80,000
Square meters.It currently has more than 500 employees. Among them,the engineering technical share 70%.It has more than 30 person in R&D .
The company applyA full set of the advanced Mitsubishi Inazawa technology and the scientific mode of management. Therefore the product stably share more and more domestic markets.The company also sell the products to Pakistan,Iran,Africa,Ukraine,Egypt,etc. It becomes one of the elevator and escalator manufacturers with the best developing potentials in China
The company introduced the advanced Mitsubushi Inazawa technology,It is specailly engaged in designing,R&D and manufacturing passenger elevator,panorama elevator,machine roomless elevator,hospital elevator,goods elevator,villa elevator,escalator and moving walk.And we have successfully research and developed the world leading Three-In-One steel belt elevators and advanced Lift-sliding mechanical parking system,Vertical lifting mechanical parking system
Suzhou Tailing Elevator Co.,Ltd have passed ISO9001:2008 Quality System Certification.ISO14001:2004 Enviromental Management System Certification, and 280012011 idt OHSAS 18001:2007 GB/T Occupational Health and Safety Management System Certification.It firstly introducs the quality supervision system into the elevator industry.It lays a solid foundation to increasing the product quality.Nowday the company has been ability with annual productive capacity of 15,000 sets of elevators and escalators.The products are well-received by vast nation-wide clients because of the perfect after-sale service networks and the after-sale severice concept of customer firstly. It has fulfilled moden business standards in the aspects of the production resources and business management.The company accords with the idea of"safe,reliable,superior,superior,effective"to continuously get the general approval and deep trust from extensive customer.
Suzhou Tailing Elevator develop prosperously by the dedicatory spririts of"green environmental protection,be bent on forging ahead".It is an effective,uinted and uprising team.It is sure to creat miracle in the chinese elevator industry.Suzhou Tailing Elevator will always adhere to the sincere,pragmatic and enthusiatic attitudes to continuously serve vast domestic and overseas users.
Model NO.: TB QC24
Trademark: STANDARDS
Transport Package: 100PCS/Bag
Specification: 7.89
Origin: Hebei China
HS Code: 39174000
Model NO.: TB QC24
Trademark: STANDARDS
Transport Package: 100PCS/Bag
Specification: 7.89
Origin: Hebei China
HS Code: 39174000
Quick Connector For Auto Spare Parts Water System    Â
PRODUCTION SHOW
Quick Connector For Auto Spare Parts Water System    Â
PRODUCTION SHOWJanuary 01, 2019