Trolling Motor Wiring, Wire Control Trolling Motor Ningbo Haibo Group Co.,Ltd. , http://www.hbtrollingmotors.com
To achieve the above main functions, it consists of 3 modules:
1) Gear part information input module: Through the first 8 parameters (a) in the input table, the 3D CAD model of the bevel gear part and the concave mold can be established in Pro/ENGINEER (b); and calculated in Pro/ENGINEER The volume of the part is 39830 (mm) 3.
Gear part information input interface.
2) Forging design module: In the forging design dialog box, input the volume of the bevel gear part obtained in the previous step and the volume ratio of the flash obtained by the test 4, the system calculates the volume of the forging flash to be 165958 (mm) 3, and the width is 392mm, thickness 2mm. Then CAD model for forgings will be generated in Pro/ENGINEER.
3) Process parameter design module: In the process parameter design dialog box, enter the height to diameter ratio of the preform 22, the system calculates the design size of the preform: the volume is 4148958 (mm) 3; the height is 6347 mm; the diameter is 2885 mm. Then In the selection dialog box for the calculation of the pendulum force and the tonnage of the equipment, enter the corresponding parameters, and the system will display the pendulum machine (a) that should select the corresponding tonnage.
At this point, the system has completed the main task. The system is designed to be used to manufacture star gears and HT-130 planetary gears. After inspection, the manufacturer's precision design requirements were met and the actual production was put into production.
Conclusion The GearCAD/CAPP20 system provides a complete computer-aided design method for the development of common gear precision forming processes and corresponding model generation. It integrates CAD and CAPP into one functional module.
The Fukang sedan planetary gears and HT-130 planetary gears designed and manufactured using this system have been tested to meet the manufacturer's design requirements for accuracy.
It should also be more integrated. The system can also store and read the model tree features of a part in the form of a database, then project its three-dimensional graphics into a two-dimensional map, and then automatically generate a two-dimensional map with AutoCAD.
March 15, 2019