With the promotion of new energy electric vehicles, vehicle charging station equipment has appeared in many large cities in China. Most of the equipments are currently integrated in fuel gas stations. These devices are inconspicuous. At first glance, it is easy to see a meter similar to automatic parking metering. It is easy. be ignored. So, how to use electric vehicle charging station equipment in the end?

1_副本1.jpg

A slightly larger charging station requires 1,700 kilowatt-hours of battery storage, and can provide more than 100 electric cars per day for charging and replacing batteries. Each charging station is provided with a plurality of charging positions. Each charging position is provided with a charging post. The charging post is an electric vehicle charger and the machine is divided into three parts. Above is a small display with a socket or coin jack in the middle and a charging compartment below.

In addition to charging devices that can be seen on the road, each charging station must be equipped with several chargers. The chargers have different voltages and currents that can charge different cars. For example, a DC 30-kilowatt motor can charge micro-cars and ordinary cars. A single-phase 5-kilowatt AC charger is used to charge medium-sized vehicles. A direct-current 60-kilowatt charger charges engineering vehicles and buses. This is like different fuels charging cars in different powertrains. Before charging, the driver must first understand his electric vehicle model and the required current.

2_副本.jpg

When the vehicle charging station equipment is in use, most of them can perform self-service operations, that is, use an IC card or automatic coin charging. Before charging, insert the charging card into the card slot first, then the display will show the corresponding amount, remaining charge, and operation prompts. Then insert the charging plug into the car's interface according to the operating instructions, and input the charging time, charging method, etc. After the display indicates that the charging is complete, unplug the charging plug, replace it in the charging compartment, and print the receipt, and remove the charging card.

Most car charging station equipment adopts the charge-and-go mode. It takes only a few minutes to ten minutes for each charge, and the operation is very simple. It can save the manual workload and replace the previous manual fueling mode.


Blower Motor For Toyota

Blower Motor For Toyota,Car Blower Motor Replacement Cost,Toyota Camry Blower Motor,Toyota Blower Motor

ZHEJIANG DEYE AUTOMOBILE PARTS CO.,LTD , https://www.deyemotor.com