First of all, it is the washers between the parts must be carried out according to the technical specifications in terms of assembly quality. Secondly, all kinds of fastening bolts on the vehicle must be tightened according to the specified torque, not too tight nor too loose. Replacement of failed oil seals occurs because these oil seals have aged and lost their elasticity. Again, regular check, dredge, and cleaning of the check valve or vent valve on the vehicle should be performed regularly. To prevent clogging and increase fuel consumption. Finally, it is the most common occurrence of oil leakage in the hub of a vehicle. This phenomenon is mainly caused by too much grease, or improper oil packaging, and that the brakes frequently make the hub temperature too high. There is a possibility that this oil leak may occur when the nut on the axle is loose. Regularly clean the coarse and fine oil filters, and check the crankcase ventilation check valve, we must ensure good ventilation of the crankcase, which is to prevent deterioration of the lubricant.

To maintain the normal temperature of the lubricating oil, the temperature should not be too high, there is the need to strengthen the maintenance of the car, to maintain a good holding condition, try to reduce the loss of lubricating oil

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features


1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.


Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com