1, charging and dismantling lamps must be carried out in a safe place.
Brush Machine Components,Brush Machine Accessories,Brush Machine Parts,Brush Machine Spare Parts
Yangzhou Haixing CNC Brush Machine Co., Ltd. , https://www.brushmachine.nl
Use method :
1. Before use, insert the plug of the dedicated charger into the charging hole on the side of the headlight to charge it. The charger indicator is red when in the charged state, and turns green when fully charged.
2. When in use, tap the switch to activate the light, press the second time to enter the working light, and press the third time to turn off. If the light is strong and weak, press and hold for 1 second to enter the frequency flash.
3, the power detection function operating mode is: close the file automatically switch to the power detection after holding the switch for 3 seconds, low light flash 5 times said 100% power, flash 4 times 80% power, flash 3 times 60% power, flash 2 The time is less than 40% of the electricity, flashing once means that 10% of the electricity needs to be used after charging.
4, with a real-time monitoring of electricity display function, can always know the lamp battery power, battery display mode: after the lamp is turned on the back of the LED lights that light, the battery power is higher than 30% display green light, the battery power is less than 30 When the % is displayed, the red light is displayed. When the power indicator shows red light, the light can only be used for about 1 hour. Please supplement the light in time after use.
5, there are many ways to wear, can be handheld, waist and head wear. When wearing headgear, hook the hook of the headlight into the helmet or headgear. Headsets can be adjusted for use according to your needs. That is, loosen the E-shaped headband to adjust the length. If you wear it on a hard hat, hook the four hooks on the hard hat to prevent it from falling off.
caveat:
2. Charging should be done in time after use to prepare for use at any time.
Note :
1. The switch must be turned off when charging, and the temperature rise of the shell is normal.
2. Do not disassemble the structural parts of the lamp, especially the sealing structure.
3 Headlights are strictly prohibited from hitting and throwing; if you accidentally drop the headlight into water or aqueous solution, remove it and wipe it clean.
Maintenance headlights must be carried out by professionals in a safe place
After use in a corrosive environment or in sea water, the surface should be wiped to keep the surface of the housing and transparent parts clean to ensure good light transmission.
Scope of application : Nighttime mobile lighting is provided at work sites such as railways, electric power, oil fields, coal, metallurgy, *, *, and petrochemical companies.
Performance characteristics :
â—† It has four functions: strong light, working light, flashing light and real-time monitoring of electricity. The light flux is 300 lumens. The continuous working time can be more than 6 hours. The working time of working light is more than 12 hours, and the product structure design realizes the irradiation direction. The stepless adjustment is completely suitable for all kinds of lighting places needed for the operation.
â—† Use special lithium battery, green, no memory, large capacity, long life, safe and stable performance, low self-discharge rate, can be charged and discharged at any time; Cree high-power LED, low energy consumption, high luminous efficiency, long life 100,000 hours, eliminating the frequent change of light bulbs.
â—† The model is lightweight and beautiful, and carries four methods: hand-held, shoulder-shoulder, head-wear, and cap. The touch-type switch is simple and convenient (there is also a headband cover that can be worn directly on the head).
â—† This product is made of PC/alloy material, which can withstand strong collision and strong drop resistance. It can be used normally in rainy days or in extremely harsh environments.
â—† This product has a real-time monitoring display function, can always know the remaining capacity of the lamp, the charger uses a dedicated charging chip to control the charge, high reliability, fast charging, overcharge protection, short circuit protection, trickle charge, status indication.
A qualified, sufficient and quick spare parts supply is necessary to make sure a continuous production. We can provide all the spare parts as per customers' requests in the event any problem happens to the machine. The components are standardized, cost-saving and have long service life. All the components are made of imported materials, with features of high wearing resistance and long service life.
November 04, 2019