Copper Coating MIG ER70S-6 Welding Wire
ER70S-6 belongs to copper-plated low alloy steel gas shielded Welding wire, using carbon dioxide or argon-rich as the shielding gas for welding. It has excellent welding process performance, stable arc combustion, less spatter, beautiful weld forming, small sensitivity of weld metal porosity, good welding technology in all position, and can be suitable for a wide range of welding current.
Quick details: Copper Coating Mig Er70S-6 Welding Wire ,Copper Welding Wire,Soldering Copper Wire,Welding Copper Wire Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.jswkweldingwire.com
As a result of the computer simulation design, making separator tank is more suitable for the flow of magnetic materials, recycling and pulp, scattered. Through a new magnetic circuit design, in the slot scan selected region to produce a large magnetic field gradient and to obtain the magnetic particles greater adsorption capacity. Meanwhile, it also makes the energy concentrated in the medium flow layer, don't waste outside the tank, grasp the these factors are hungry magnetic separator to achieve better effect.
With the new magnetic circuit design, more and more magnetic poles are designed in the area, which can increase the stirring effect. The separation of magnetic and non magnetic materials is more rapid, and the recovery rate of concentrate powder is higher.
Characteristic:
1, according to the different stages of the ore selection characteristics were designed to select, coarse, selection and other magnetic separation machine.
2, the use of advanced magnetic circuit design, magnetic distribution uniformity, high permeability depth, high recovery rate, select the use of multi pole structure, it is beneficial to improve the grade of concentrate.
3, the tank structure is reasonable, beneficial to pulp through, to prevent clogging, and are arranged at the two ends of silt discharge mechanism, easy for maintenance and cleaning.
4, the transmission device is stable and reliable, the whole performance is good, can be a long time without fault operation
Bucket rod under the action of gravity on the upper plate via a slurry feeding pipe into the separator evenly distributing device, after fully dispersed evenly diffused in the magnetic iron unloading belt in slurry along the magnetic plate inclined downward flow of slurry containing ferromagnetic material in strong magnetic field, was firmly adsorbed on the iron unloading belt and motor drive device to drive the unloading iron belt along the magnetic plate to tilt towards the direction of movement, at the same time, the adsorption of ferromagnetic objects into the iron unloading area, was to unload iron water pipe flushing water rushed into the tailings were collected, no magnetic slurry to continue along the magnetic plate downward flow into a concentrate hopper is concentrated collection.
Technical characteristics:
The selection of high performance NdFeB magnets, planar magnetic circuit design unique, the magnetic field is more reasonable.
Poly magnetic composite magnetic system, multi magnetic pole structure, high magnetic field strength.
The effective magnetic area is big, the election time is long, the effect is good.
The theory of fluid mechanics, magnetism and mechanics, etc., together with the completion of the work.
The angle of the magnetic plate can be adjusted to meet the different flowing materials.
With a uniform feeding device, automatic cleaning of the magnetic adsorption.
According to user requirements design, easy disassembly.
Low energy consumption, easy maintenance.
Scope of application
Iron removal and purification, especially for non metallic minerals such as quartz sand, potash feldspar, etc., are processed by wet process. In addition, for weak magnetic minerals of hematite, limonite, hematite, siderite, manganese ore, such as tantalum and niobium ore with good separation effect.
In order to improve the efficiency of mineral processing, reduce the cost, improve the recovery rate of concentrate powder, mineral magnetic separator used the latest production technology and the latest research results of magnetic materials.
As a result of the computer simulation design, making separator tank is more suitable for the flow of magnetic materials, recycling and pulp, scattered. Through a new magnetic circuit design, in the slot scan selected region to produce a large magnetic field gradient and to obtain the magnetic particles greater adsorption capacity. Meanwhile, it also makes the energy concentrated in the medium flow layer, don't waste outside the tank, grasp the these factors are hungry magnetic separator to achieve better effect.
With the new magnetic circuit design, more and more magnetic poles are designed in the area, which can increase the stirring effect. The separation of magnetic and non magnetic materials is more rapid, and the recovery rate of concentrate powder is higher.
Characteristic:
1, according to the different stages of the ore selection characteristics were designed to select, coarse, selection and other magnetic separation machine.
2, the use of advanced magnetic circuit design, magnetic distribution uniformity, high permeability depth, high recovery rate, select the use of multi pole structure, it is beneficial to improve the grade of concentrate.
3, the tank structure is reasonable, beneficial to pulp through, to prevent clogging, and are arranged at the two ends of silt discharge mechanism, easy for maintenance and cleaning.
4, the transmission device is stable and reliable, the whole performance is good, can be a long time without fault operation
Bucket rod under the action of gravity on the upper plate via a slurry feeding pipe into the separator evenly distributing device, after fully dispersed evenly diffused in the magnetic iron unloading belt in slurry along the magnetic plate inclined downward flow of slurry containing ferromagnetic material in strong magnetic field, was firmly adsorbed on the iron unloading belt and motor drive device to drive the unloading iron belt along the magnetic plate to tilt towards the direction of movement, at the same time, the adsorption of ferromagnetic objects into the iron unloading area, was to unload iron water pipe flushing water rushed into the tailings were collected, no magnetic slurry to continue along the magnetic plate downward flow into a concentrate hopper is concentrated collection.
Technical characteristics:
The selection of high performance NdFeB magnets, planar magnetic circuit design unique, the magnetic field is more reasonable.
Poly magnetic composite magnetic system, multi magnetic pole structure, high magnetic field strength.
The effective magnetic area is big, the election time is long, the effect is good.
The theory of fluid mechanics, magnetism and mechanics, etc., together with the completion of the work.
The angle of the magnetic plate can be adjusted to meet the different flowing materials.
With a uniform feeding device, automatic cleaning of the magnetic adsorption.
According to user requirements design, easy disassembly.
Low energy consumption, easy maintenance.
Scope of application
Iron removal and purification, especially for non metallic minerals such as quartz sand, potash feldspar, etc., are processed by wet process. In addition, for weak magnetic minerals of hematite, limonite, hematite, siderite, manganese ore, such as tantalum and niobium ore with good separation effect.
1. Type: CO2 wire/SG2 welding wire/ Mig wire/ GMAW wire
Solid welding wire/ Gas shielded welding wire
2. Raw material: MIld steel/ Carbon steel/ Qingdao steel wire
Model NO.: CTP
Model NO.: CTP
In order to improve the efficiency of mineral processing, reduce the cost, improve the recovery rate of concentrate powder, mineral magnetic separator used the latest production technology and the latest research results of magnetic materials.October 30, 2023